AUVIO 1500476 User Manual

Package Contents

®
Bluetooth Music Receiver
„
AC Adapter
„
T HE PERFO RM ANCE YOU NEED ®
1/8" (3.5mm) Audio Cable
„
Bluetooth
®
1/8" (3.5mm) to RCA Cable
„
Music Receiver
User's Guide
„

Use Your Receiver

Please read this user's guide before using
your new receiver.
1. Plug the supplied audio cable or the
RCA cable into the AUX jack, OR plug
an optical cable (not included) into the
User's Guide 1500476
OPTICAL jack, then connect to your
speaker or amplifier.
2. Connect the supplied power adapter
to the DC IN jack, then plug into a
standard AC outlet.
3. Press and hold CONNECT until the
LED indicator lights red to turn on the
receiver.
1500476_UG_EN_052813.indd 1-6
2 3
2 3
-OR-
AUDIO MULTI-CHANNEL RECEIVER SX-218
MULTI JOG
ENTER
VSB DIALOGUE
DVD/LD TV/SAT DVR CD CD -R / TAPE / MD FRONT AUDIO FM AM TUNING STATION MPX MODE ENHANCEMENT
MASTER
SLEEP VOLUME
MUTE TUNER EDIT TONE SETUP QUICK SETUP RETURN FRONT
AUDIO INPUT
MULTI JOG
DOWN UP
-OR-
4
4
4. If the receiver has not been previously If the AUX and OPTICAL jacks are both
connected, sound output will only be
paired with a device, the LED
available from the AUX connection.
indicator will light red. Press and hold
CONNECT until the LED indicator If the connected device moves too far
flashes red and blue to enter pairing away from the receiver, the receiver
disconnects from the device but
mode.
resumes connection once the device is
5. See instructions of your Bluetooth-
close.
enabled device to pair with the
Using an adapter that does not meet the
receiver. After successful pairing,
receiver's specifications could damage
the indicator lights blue. If you are
the receiver.
prompted for a PIN, enter 0000.
NFC (Near Field Communication)
6.
Use the playback controls on your
You can touch the receiver with a NFC-
audio device.
enabled device to connect or disconnect
the Bluetooth communication. You may
7. Disconnect the Bluetooth connection
need to try different places on your
after using; the indicator flashes red.
phone as the NFC might be placed on
Press and hold CONNECT for 3
8.
either the back, top or bottom of the
seconds to turn off the receiver.
phone cabinet.
n
If you have two or more NFC devices,
Note:
when you touch the second device
To avoid noise interference, always
to the receiver, it will automatically
power off your amplifier or speaker
connect to the receiver, and the first
before plugging or unplugging your
cables. device will automatically disconnect
from the receiver.
5
5
6
6
6/13/2013 11:26:39 AM