OPCOM Farm GrowBox User Manual page 27

User Manual
GrowBox
Keep the air-holes
facing up.
6. Put draining tube into a container
or bucket to empty tank.
7. Plug Pump power cable into
Control box and put pump into
the water.
8. Plug the unit into an AC outlet
and press POWER ON. The pump
will turn on and water will drain out
of the unit ,after about 10 minutes.
9. Turn off the machine immediately
when water is out to avoid air
bubbles to enter (water pump
will get damaged if air bubbles
enter for a long time).
10. Clean the water tank and machine
with dry cloth.
Note: If there is a serious alage
problem, spray with alcohol and
wait for 3-5 days, then start a
new planting
11. Reattach the water tube onto
the pump.
12. Rinse the water filter and replace;
change out with new filter if it
started disintegrating.
13. Replace dosing cup and pump
on plate.
14. Plug pump power into control
box again.
15. Add new clean water into water
tank up to correct level.
16. Power ON and test all function
buttons.
P24
cycle.