Download Print this page

Getting Started; Fuse Information - Kensington K33346US-CL Instruction Manual

Travel plug adapter with usb charger for ipod, notebooks, and more

Advertisement

Getting Started

1. For devices with an AC plug, snap the AC adapter cap (C) onto
the Travel Plug Adapter (A). For USB devices, snap the USB
adapter cap (B) onto the Travel Plug Adapter (A).
2. Press and hold the release button (F) on the Travel Plug Adapter
(A). While holding the button, slide the desired plug selector (G)
forward until it snaps into place.
F (press and hold)
G (slide)
NOTE: You must press and hold the release button (F) and slide all plug
selectors (G) backward into the locked position before you can move
another plug selector (G) forward.
3. Plug your device's AC or USB cord into the corresponding
adapter cap (B or C).
4. Plug the Travel Plug Adapter (A) into a power outlet.
The battery indicator/charging light comes on. If you are
using an iPod shuffle, it may take up to one minute for
the light to come on.
NOTE: To remove the AC adapter cap (B) or USB adapter cap (C) from
the Travel Plug Adapter (A), press and hold the release button (F) and
then remove the cap.

Fuse Information

The Travel Plug Adapter (A) comes with a fuse installed and an
extra fuse (D) located in the AC adapter cap (B). Use only T2.5A
fuses with the Travel Plug Adapter.
Extra
fuse
Press
here
If you need to replace the fuse:
1. Remove the extra fuse from the AC adapter cap (B). With the tip
of a pen, press on the plastic notch located next to the fuse, and
then turn the AC adapter cap upside down. The fuse should fall
out of the cap.
2. Remove the fuse from the Travel Plug Adapter. Using a coin,
turn the fuse cover and pop out the fuse.
3. Insert the extra fuse into the Travel Plug Adapter.
Usage
The Travel Plug Adapter can be used with Class II electronic
devices up to 2.5A (110V n 275W / 220V n 550W). Most consumer
electronic devices, such as cell phones, PDAs, laptop computers,
alarm clocks, battery chargers, and more, are Class II devices.
Any use of this product other than as described in the instructions
above will void the warranty.
The manufacturer declines any responsibility in case of damage.
Contacting Kensington
Troubleshooting information and answers to frequently asked
questions are available 24 hours a day on the Kensington Web site
at www.kensington.com.
Please go to www.kensington.com to register your product.
Fuse
Coin
cover
slot

Advertisement

loading