Sifam Tinsley Delta Clip B Operating Manual

Delta Clip B for AC current measurement

Application:

The Delta Clip B (300 A / 1000 A) measures
current without interrupting the conducting line.
They are used for electrically isolated measurement
of alternatin g current within a broad range ,without
interrupting the current conducti ng cable and bus
bars.

Features of Delta Clip B:

Safety in accordance with IEC 61010-1.
*
Minimum transformation ratio error.
*
Compact, handy design.
*
Permanently connected safety cables.
*
Safety Features & Precautions:
- Application around & removal from
HAZARDOUS LIVE conductor is permitted
The delta clip
constructed with safety rules of IEC 61010-1.
When in operation the safety of user and unit is
assured. Also when the secondary circuit is
interrupted, the Clamp has a Protectio n circuit
which prevents high voltage to be generated.
Before operating read completely the instruction
manual. These instruction must be followed by
users in all respects. In case of incorrect use or
careless handling, the safety of both user and
clamp is not assured.

Measurement:

The Delta Clip B measures AC current
without interrupting the cond ucting line.
opening contact of both the core which become
visible when trigger is pressed, must be always
kept clean. Even small outside particles can
deviate measuring accuracy. The measuring
seco ndary long cables with contact- protected
connection plugs, which electrically isolates the
measurement of AC current without interruption.
Delta Clip B

Operating Manual

current transformers are
Delta Clip B
The Delta Clip B 300A should be used as
accessories for Multi 12s which directly
displays the Current in 300A range.
Delta Clip B
The Delta Clip B 1000A should be used as
accessories for Multi series.