Advertisement
Helmet Mounting
1.
Remove the liner padding inside your helmet.
2.
Place the helmet mount on top of your helmet.
3.
Feed velcro straps through the ventilation slits.
Option 1
Press and hold one velcro strap firmly against the inside of the helmet. Cross the
other strap tightly over it. Cut the excess strap length if necessary.
05
Option 2
Feed the velcro straps back up through the center ventilation slit and through the inner
slits of the helmet mount. Pull straps tight and lock down firmly. Cut the excess strap length
if necessary.
4.
Place the XERA on the helmet mount.
5.
Attach the o-ring to the XERA's rear hook, feed it through the helmet mount and attach to
the front hook.
06
Advertisement
