PLDT Home PWN3701 Quick Installation Manual

PLDT HOME REPEATER
Wireless-N Repeater
Quick Installation Guide Revision 1.0
www.prolink2u.com

2. Hardware Installation

Laptop
Router WiFi Range
www.prolink2u.com
© Copyright 2014. PROLiNK® All rights reserved.
Smartphone Tablet
Wifi Repeater
Cable / DSL Modem Router
WiFi Repeater Range

Package Contents:

● 1 x WiFi Repeater ● 1 x Quick Installation Guide

1. Overview

Front View Left View
Reset
WPS
2 1 2
WPS : Press 1 second to trigger WPS function
1
LED Indicators:
2
Power : On - Power On
Off - Power Off
WLAN : On - Wireless turn On
Off - Wireless turn Off
WPS : On - WPS feature turn On
Off - WPS feature turn Off
Blinking - WPS triggering
Signal Strength : 1 LED On : Low Signal
2 LEDs On : Medium Signal
3 LEDs On : Good Signal
4 LEDs On : Excellent Signal
Note:
The illustration in this document may appear different from your model.
www.prolink2u.com

3. Connecting to the Root AP

Method 1 : With WPS button

Step 1. Plug the Wifi Repeater into the electrical socket and power on the electrical socket. The Power
LED on Wifi Repeater will illuminate. Wait until the WLAN
up.
Step 2. Press the Wi-Fi Protected Setup (WPS) button on your wireless router or root AP.
Step 3. Press the WPS button of Wifi Repeater for 1 second until the WPS
Note 1. The Signal Strength LEDs will illuminate to show the link quality once connected to
the root AP.
Note 2. Both buttons must be pressed within 2 minutes.
LOCATION 1
WPS
Wireless Router
LOCATION 2
WPS
WPS
Wifi Repeater
www.prolink2u.com
Right View Back View
4
3
Reset : Press 1 - 5 seconds to reboot Repeater.
3
Press > 5 seconds to reset to factory default and reboot.
AC Power Input
4
and WPS LEDs light
LED starts to blink.
2 seconds
2
Minutes
1 second Within 2 Minutes