Table of Contents
Advertisement
1
DESCRIPTION
H2scan believes that protecting lives means being able to locate and find hydrogen leak as quickly as possible. With
two sensing elements on the same semiconductor die, the HY-ALERTA™ 500 can detect hydrogen leaks as low as
15 ppm and will not saturate or be destroyed when detecting concentrations of hydrogen up to 100%. The flexible
cable allows the sensor probe access to virtually all potential leak sources.
2
SPECIFICATIONS
Sensitivity Range:
Response Time:
Ambient Temperatures:
Relative Humidity:
Power:
Environmental:
Ingress Protection:
Calibration Period:
Weight:
Product Life Expectancy:
Certifications:
90000002 R13
HY-ALERTA
0.0015% (15 ppm) to 100% hydrogen by volume in air.
Indication of hydrogen within seconds.
Stabilization to final value depends on concentration.
Operating: 0°C to +40 °C
Storage: -20°C to +45 °C
0-95% non-condensing
Internal rechargeable Lithium Ion battery yields over 10 hours of operation and is
recharged in 4 hours with included charger.
Battery charger input: 100-240VAC, 50-60Hz, 0.6A.
Indoor/Outdoor Use
Altitude up to 2000 meters
Pollution degree 2 environment
IP64 capable
Recommended factory calibration on a 12 month basis.
975 g (2.15 lb.) unit and carrying pouch
2.2 kg (5 lb.) shipping weight (unit with accessories)
10 years
TM
500 HANDHELD HYDROGEN LEAK
DETECTOR OPERATING MANUAL
Page 5 of 14
Advertisement
Table of Contents
