D-Link DIR-605L Quick Install Manual page 2

Configuration
1 Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and
enter http://dlinkrouter.local./. You can also enter the IP address of the
router (http://192.168.0.1).
Note: If you want to configure your router from a wireless computer or mobile
device, connect to the router wirelessly by going to your wireless utility on your
device. Scan for the wireless network name as listed on the sticker on the router.
Select the network and then enter the Wi-Fi Password.
2 When the Welcome screen appears, select your language, and then click
Start to continue.
3
Select Auto Detect and click Next to continue.
The router will automatically detect the type of connection are you using.
4
If you have selected Manual Setup or if the router did not detect your
Internet connection, select the Internet type from the Internet Connection
drop-down menu.
DSL (PPPoE) users enter your PPPoE user name and password supplied by
your ISP. If you do not know this information, please contact your ISP.
5
Under Wireless Settings, enter a name for your wireless network (also called
SSID or Wi-Fi Network name).
Next to Security Mode, select AUTO-WPA/WPA2 (recommended). Enter a
network key (also known as a passphrase or Wi-Fi Password).
Click Next to continue.
Once you are connected, a summary screen will appear. If you want
6
to register the router with the mydlink service, click Configure under
mydlink settings and proceed to Step 7. Otherwise check the Save my
network settings box at the bottom and click Save to finish setting up
your router.
Note: Setting up "mydlink" is optional and not required for the router to function.
Troubleshooting
7 If you already have a mydlink account, select Yes, I have a mydlink
How do I connect my wireless devices to the DIR-605L router?
account and enter your username and password. Click Login to continue.
1. Open your wireless network utility that displays available wireless networks.
2. Select the Wi-Fi Network name you assigned in the wizard and connect.
You can also connect using WPS:
1. Press the WPS button on the DIR-605L for three seconds.
If you have not registered a mydlink account, select No, I want to register
2. Within one minute press the WPS button on your wireless device.
and login with a new mydlink account. Fill out the registration form and
click Register. 3. Allow up to two minutes to connect.
How do I change the wireless settings on the DIR-605L router?
1. Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and
2. At the login screen, type in admin for the user name and enter the router
3. Go to Setup > Wireless Settings > Manual Wireless Network Setup to
The router has successfully connected to mydlink service. Check the Save
8
my network settings box at the bottom and click Save to finish setting
Documentation available at http://www.dlink.com/DIR-605L.
up your router. The router will reboot.
Technical Support
Having trouble installing your new product? D-Link's website contains the latest
user documentation and software updates for D-Link products. U.S. and Canadian
customers can contact D-Link Technical Support through our website.
United States
Internet:
Copyright ©2013 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link
Corporation or its subsidiaries in the United States and other countries. iPhone, iPad, and iPod touch are registered trademarks of Apple
Inc. Android is a trademark of Google, Inc. Other trademarks are the property of their respective owners. Maximum wireless signal rate
derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental
Congratulations! You have completed the router installation.
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput
rate. Environmental factors will adversely affect wireless signal range. Product specifications, size and shape are subject to change
without notice, and actual product appearance may differ from that depicted on the packaging. Visit www.dlink.com for more details.
This D-Link product includes software code developed by third parties, including
software code subject to the GNU General Public License ("GPL") or GNU Lesser
General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL,
and information on obtaining access to the GPL code and LGPL code used in this
Note: If you did not run the setup wizard or you reset the router to its default
product, are available to you at:
settings, refer to the sticker on the router for the default Wi-Fi Network Name and
Wi-Fi Password.
http://tsd.dlink.com.tw/GPL.asp
The GPL code and LGPL code used in this product is distributed WITHOUT ANY
WARRANTY and is subject to the copyrights of one or more authors. For details,
see the GPL code and the LGPL code for this product and the terms of the GPL and
LGPL.
Note: Some devices may require you to log in to a utility to start the WPS process.
Written Offer for GPL and LGPL Source Code
Refer to the user manual of the device you want to connect to the router if you do
not know how to start the WPS process.
Where such specific license terms entitle you to the source code of such software,
D-Link will provide upon written request via email and/or traditional paper mail
the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to
cover shipping and media charges as allowed under the GPL and LGPL.
enter http://dlinkrouter.local./. You can also enter the IP address of the
Please direct all inquiries to:
router (http://192.168.0.1).
Email:
password you created in the wizard (no password by default).
GPLCODE@dlink.com
create a new Wi-Fi network name (SSID) and Wi-Fi password.
Snail Mail:
Attn: GPLSOURCE REQUEST
D-Link Systems, Inc.
17595 Mt. Herrmann Street
Fountain Valley, CA 92708
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Canada
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
http://support.dlink.com Internet: http://support.dlink.ca
View the full GPL Code Statement at http://www.gnu.org/licenses/gpl.html
Version 2.2 | August 06, 2013 6R605LB1Q.G2G
GPL Code Statement