Summary of Contents for Longshine LCS-8539TXN
- Page 1 CardBus 10/100 Fast Ethernet PC Card LCS-8539TXN Quick Installation Guide M73-LGS01-020...
-
Page 2: Hardware Installation
HARDWARE INSTALLATION The CardBus 10/100 Fast Ethernet PC Card (CardBus PC Card) could be connected to either 100Mbps Fast Ethernet or 10Mbps Ethernet over unshielded twisted pair (UTP) cable. The PC Card has the ability of automatic sensing and operating on either speed without manual recofiguration. - Page 3 4. Attach the other end of the cable into an Ethernet Hub/Switch. 5. You are now ready to continue the software installation. - 2 -...
-
Page 4: Software Installation
SOFTWARE INSTALLATION Windows 95 Installation (OSR2) 1. Start Windows. Make sure the CardBus 10/100 Fast Ethernet PC Card is well connected to the CardBus Socket. 2. Click Next on Update Device Drivers Wizard. 3. Click The Others Locations button. 4. Insert driver diskette into the floopy disk. 5. - Page 5 Windows 98 Installation 1. When the PC Card is well inserted into the PC Card slot of your computer, the following picture will appear automatically and prompt you to insert the new device driver. Click Next to proceed. 2. Select Search for the best driver for your device (recommended) and click Next.
- Page 6 4. Windows has found the appropriate driver for the new device. Click Next to install. 5. Click Finish. The PC Card driver installation will be successfully completed. - 5 -...
- Page 7 6. Click Yes to restart your computer. Windows 2000 Installation 1. When the PC Card is well inserted into the PC Card slot of your computer, the following picture will be appeared on the screen automatically. Click Next to proceed. 2.
- Page 8 3. Insert the new device driver to the disk drive and click Next. Windows will start searching for the appropriate driver for the PC Card. 4. Wait for a while until Windows has found the appropriate driver. - 7 -...
- Page 9 5. Click Yes to continue. 6. Click Finish. The PC Card driver installation is successfully completed. - 8 -...
- Page 10 Windows ME Installation Once the PC Card is well connected to your computer, Windows ME will automatically detect the new device. Select Specify the Location of the driver… and click Next. Insert the device driver disk into the floppy disk drive on your system. Select Removable Media (Floppy, CD-ROM…) and click Next.
- Page 11 Windows will copy the appropriate driver to your system. If Windows ME asks you to supply your original Windows installation CD-ROM, load it on the CD-ROM drive. Click Finish to complete the software installation. Windows XP Installation Once the device is well connected, Windows will detect the new device and prompt you to insert the network device driver.
- Page 12 Insert the device Driver Disk into the floppy disk drive of your system. Select Search for the removable media… and click Next. Windows will start searching for the appropriate driver for the installation. When the screen appears as below, click Continue Anyway to proceed.
- Page 13 Wait for seconds while Windows copies the appropriate driver to your system. Click Finish. The software installation for this network device is now completed. - 12 -...
-
Page 14: Declaration Of Conformity
DECLARATION OF CONFORMITY CE = European Community Conformity Mark We, Manufacturer/Importer Longshine Technologie (Europe) GmbH An der Strusbek 9 22926 Ahrensburg Germany Declare That The Product LCS-8539TXN 10/100Mbps Fast Ethernet Card Bus Card Is In Conformity With: Standards Results EN 55022:1998...