ZIGBEE 4257050-ZHAC Installation Manual

FCC Information
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful inerference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
∙ Reorient or relocate the receiving antenna.
∙ Increase the separation between the equipment and the receiver.
∙ Connect the equipment into an outlet different from that to which the receiver
is connected.
∙ Consult the dealer or an experienced radio/TV technician for help.
Contains FCC ID:
W7Z-ZICM357SP2
WARNING!
The total current limit of the device through both outlets is 300W.
Do not exceed this value.
WARNING!
If a direct short is created on the output, the Appliance Module
will be damaged and will no longer function.
WARNING!
If a load greater than 300 Watts is attached to the output, the
Appliance Module will be damaged and will no longer function.
NOTES:
_____________________________________________
_____________________________________________
_____________________________________________
_____________________________________________
_____________________________________________
Next-GeN Lamp moduLe
4257050-ZHAC

INSTALLATION GUIDE