Page 1
2. YOUR STONE CHARGER When on the move, place your STONE Headset in the STONE Charger and it will charge wirelessly. When the STONE Headset is placed in the STONE Charger a small light indicator lets you know your battery level.
Page 2
Insert the headset into the STONE Charger. The headset is now turned off, but ready to take a call. Please note: It is possible to turn off the headset manually without using the STONE Charger. Press Answer/End button for 4-5 seconds to turn it on/off.
Page 3
Bluetooth® device. Your phone will find the Jabra STONE. Your phone then asks if you want to pair with it. Accept by pressing "yes" or "ok" on the phone and confirm with the passkey or PIN = 0000 (four zeros) if prompted.
9. CHECK YOUR STATUS The StatusDisplay™ lets you check your battery level and Bluetooth® connectivity at a glance. Simply insert your headset into the STONE Charger and take it out again to check your status. Solid blue = paired. Green light = battery ok.
Page 5
When listening to music and receiving a call, the music will pause and you will hear your ringtone. * Phone dependent (supports A2DP) 11. WEARING STYLES The Jabra STONE tucks behind your ear for discreet comfort. Wear your Jabra STONE Headset on your right ear.
Need help?
Do you have a question about the STONE and is the answer not in the manual?
Questions and answers