CEN-TECH 62120 Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. CEN-TECH Manuals
  4. Scanner
  5. 62120
  6. Owner's manual & safety instructions

CEN-TECH 62120 Owner's Manual & Safety Instructions

Professional obd ii & can scan tool
Hide thumbs
Table of Contents

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2014 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15f

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 62120 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for CEN-TECH 62120

Summary of Contents for CEN-TECH 62120

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. For technical questions, please call 1-888-866-5797. Page 2 Item 62120...

  • Page 3: Safety

    Avoid body contact with grounded increases the risk of electric shock. surfaces such as pipes, radiators, ranges and refrigerators. Make sure your hands are dry before operating the Scan Tool. For technical questions, please call 1-888-866-5797. Item 62120 Page 3...
  • Page 4 Service There are no user serviceable parts. Scan Tool service must be performed only by qualified repair personnel. For technical questions, please call 1-888-866-5797. Page 4 Item 62120...

  • Page 5: Specifications

    CAN bus. Emissions Control Information label, which is located in the engine compartment. OBD II was installed in some 1994 and 1995 model year gasoline vehicles. For technical questions, please call 1-888-866-5797. Item 62120 Page 5...

  • Page 6: Definitions

    For example, a vehicle may use ID code $7E8 for the PCM and $7E9 for the TCM. Control Module Control Module Definition PCM/ECU Powertrain Control Module/Engine Control Unit Transmission Control Module Figure A: Common Control Modules For technical questions, please call 1-888-866-5797. Page 6 Item 62120...

  • Page 7: I/M Monitors

    FUEL - Fuel System NCAT - NOx Aftertreatment CCM - Comprehensive Components BP - Boost Pressure System EGS - Exhaust Gas Sensor PM - PM Filter EGR - EGR System For technical questions, please call 1-888-866-5797. Item 62120 Page 7...

  • Page 8: Diagnostic Test Modes

    $09 - Request Vehicle Information Stored DTCs $04 - Clear/Reset Emission-Related $0A - Request Emission-Related Diagnostic Information Permanent DTCs $05 - Request Oxygen Sensor Monitoring Test Results (2007 and older vehicles only) For technical questions, please call 1-888-866-5797. Page 8 Item 62120...

  • Page 9: Diagnostic Trouble Code

    *The Scan Tool supports the following Code Types: Generic (SAE): Manufacturer Specific: B0, B3 B1, B2 C0, C3 C1, C2 P0, P2, P34-P39 P1, P30-P33 U0, U3 U1, U2 Figure B For technical questions, please call 1-888-866-5797. Item 62120 Page 9...

  • Page 10: Setup - Before Use

    Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use. Functions (located on side) Figure C For technical questions, please call 1-888-866-5797. Page 10 Item 62120...
  • Page 11 Moves down through menu and submenus. Left Button Moves to next screen if information Moves to previous screen if information covers more than one screen. covers more than one screen. For technical questions, please call 1-888-866-5797. Item 62120 Page 11...

  • Page 12: Operating Instructions

    Test Readiness, see page 17. the dashboard on the driver’s Note: To read Diagnostic Trouble side. (Refer to vehicle’s owner’s Codes, see page 19. manual for location of DLC.) Figure D: DLC For technical questions, please call 1-888-866-5797. Page 12 Item 62120...

  • Page 13: Setup

    Update Mode Figure E Main Menu Set Language From System Setup, select Language Language, then press OK. English Select desired language, then press OK. o Español o Français Figure F For technical questions, please call 1-888-866-5797. Item 62120 Page 13...
  • Page 14 Monitors are acceptable. Monitors, select the number of d. Reset Factory Default incomplete Monitors allowed. Refer to EPA guidelines for acceptable incomplete monitor limits. ………… Allowed INC Monitors Figure J For technical questions, please call 1-888-866-5797. Page 14 Item 62120...
  • Page 15 Status Beep Set - Control Notification Sounds From System Setup, select Status Beep Set Status Beep Set, then press OK. Beep ON Select Beep ON or Beep OFF, o Beep OFF then press OK. Figure M For technical questions, please call 1-888-866-5797. Item 62120 Page 15...

  • Page 16: Display Test

    OK. If functioning properly, the selected LED will light up. LED Test Press ESC to exit the test. RED LED ON YELLOW LED ON GREEN LED ON Figure P For technical questions, please call 1-888-866-5797. Page 16 Item 62120...

  • Page 17: I/M Readiness Quick-Check

    • Have the vehicle serviced. Yellow LED - Might be Ready Indicates there are pending DTCs or there are Monitors that have not finishing running. • Perform a Drive Cycle, then repeat the test. For technical questions, please call 1-888-866-5797. Item 62120 Page 17...

  • Page 18: Diagnostic Test Modes

    Live Data View Freeze Frame I/M Readiness 02 Monitor Test On-Board Mon. Test Figure T Note: If vehicle is 2008 or newer, the 02 Monitor Test* will not be present. For technical questions, please call 1-888-866-5797. Page 18 Item 62120...

  • Page 19: Read Trouble Codes

    See “DTC Lookup” on page 20 to view likely causes for DTCs. Note: To view operational data stored when the DTC was stored, see View Freeze Frame Data on page 28. For technical questions, please call 1-888-866-5797. Item 62120 Page 19...

  • Page 20: Dtc Lookup

    Scan Tool will refer you to the digits, then press OK. vehicle’s owner’s manual. Note: DTC definitions can DTC Lookup P0303 also be found online. Left Right Change digit Confirm Exit Figure W For technical questions, please call 1-888-866-5797. Page 20 Item 62120...

  • Page 21: Erase Codes

    On-Board Mon. Test need to be completed before performing an Emissions Readiness Test. Figure Y Clearing the error code will not repair the car. Repair the car, then clear the error code. For technical questions, please call 1-888-866-5797. Item 62120 Page 21...

  • Page 22: View Live Pid Data

    Live Data DTC_CNT FUELSYS1 FUELSYS2 -- ? LOAD_PCT (%) Figure AF ECT(°F) -40.0 -0.0 SHRTFT1 (%) Note: If necessary, have a qualified LONGFT1 (%) -0.8 technician interpret the data. Figure AE For technical questions, please call 1-888-866-5797. Page 22 Item 62120...
  • Page 23 [ ] – Select/Deselect all [OK] – Confirm Figure AJ [ESC] – Cancel Note: If necessary, have a qualified Press any key to con. technician Interpret the data. Figure AH For technical questions, please call 1-888-866-5797. Item 62120 Page 23...

  • Page 24: Record Live Pid Data

    DTC is detected. then press OK. …….……Pick Trigger Mode ………………..Record Data 1/3.. Manual Trigger DTC Trigger Complete Data Set Custom Data Set Unit of Measure Figure AN Figure 5.21 Figure AM For technical questions, please call 1-888-866-5797. Page 24 Item 62120...

  • Page 25: Playback Data

    Frame 6/46 7/46 8/46 9/46 Row 35 - ECT(° F) - 40 3/46 4/46 5/46 Frame 6/46 7/46 8/46 9/46 Row 36 - SHRTFT1(%) 99.2 Figure AR: Interpreting Playback Data For technical questions, please call 1-888-866-5797. Item 62120 Page 25...
  • Page 26 Selecting this location will overwrite it with new data. Have the passenger select/deselect PIDs. ……..Custom Data Set 4/20 DTC_CNT √ FUELSYS1 FUELSYS2 LOAD_PCT #001 SHRTFT1 LONGFTI Figure AU For technical questions, please call 1-888-866-5797. Page 26 Item 62120...

  • Page 27: Playback Live Pid Data

    Location #2 Playback Data, then press OK. Location #3 Figure BA Interpret data according to “Playback Data” on page 25. Note: If necessary, have a qualified technician Interpret the data. For technical questions, please call 1-888-866-5797. Item 62120 Page 27...

  • Page 28: View Freeze Frame Data

    Erase Codes Live Data View Freeze Frame I/M Readiness Figure BF 02 Monitor Test On-Board Mon. Test Note: See “I/M Readiness Quick- Figure BE Check” on page 17 to interpret data. For technical questions, please call 1-888-866-5797. Page 28 Item 62120...

  • Page 29: 02 Monitor Test

    Max for text Cyc (V) View Freeze Frame I/M Readiness 02 Monitor Test On-Board Mon. Test Figure BI Figure BG Note: If necessary, have a qualified technician Interpret the data. For technical questions, please call 1-888-866-5797. Item 62120 Page 29...

  • Page 30: On-Board Monitor Test

    H02S Bank Sensor 2 On-Board Mon. Test Catalyst Mon. Bank 1 EVAP Figure BJ EGR Heater Mon.B1S2 Misfire Misfire Figure BL Note: If necessary, have a qualified technician Interpret the data. For technical questions, please call 1-888-866-5797. Page 30 Item 62120...
  • Page 31 $81 Test The selected mode is TEST 00:00:18 not supported 00:00:00 00:01:05 Press any key to con. Figure BN Figure BQ Note: If necessary, have a qualified technician Interpret the data. For technical questions, please call 1-888-866-5797. Item 62120 Page 31...

  • Page 32: Vehicle Information

    Figure BW Vehicle ID Number View CVN information. VIN: LSVGU49JX92545482 Cal. Verf. Number CVN1: 2B 9B F5 E4 Figure BT From Vehicle Info., select, Calibration ID then press OK. Figure BX For technical questions, please call 1-888-866-5797. Page 32 Item 62120...

  • Page 33: Component Test

    Modules Present, then press OK. Modules Present Diagnostic Menu 10/11 Protocol Component Test $7E8 CAN STD FAST Vehicle Info. $7E9 CAN STD FAST Modules Present Unit of Measure Figure BZ Figure BY For technical questions, please call 1-888-866-5797. Item 62120 Page 33...

  • Page 34: Review Data

    OFF. From the Main Menu, select Ready Test, then press OK. Figure CB Note: See “I/M Readiness Quick- Check” on page 17 to interpret data. Main Menu For technical questions, please call 1-888-866-5797. Page 34 Item 62120...

  • Page 35: Print Data

    Configure Monitors Unit of Measure a. Go to www.HarborFreight.com Key Beep Set Status Beep Set b. Search for 62120 Tool Self-test c. Click Software Update tab Update Mode d. Download software Figure CD...

  • Page 36: About

    -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. For technical questions, please call 1-888-866-5797. Page 36 Item 62120...

  • Page 37: Maintenance

    Store the Scan Tool, and accessories careful to not put excessive away from sunlight in a dry, locked pressure on the Display Screen. area, out of the reach of children. For technical questions, please call 1-888-866-5797. Item 62120 Page 37...

  • Page 38: Troubleshooting

    LED Lamps Not Working page16. If LED(s) fail, have a qualified technician replace the LED(s). Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. For technical questions, please call 1-888-866-5797. Page 38 Item 62120...

  • Page 39: Parts List

    Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. For technical questions, please call 1-888-866-5797. Item 62120 Page 39...

  • Page 40: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.

Table of Contents

Save PDF