ZMODO Pivot Quick Start Manual

Pivot
Quick Start Guide
Follow the on-screen instruction and
4
select "Tap here to select WiFi" to
go to the WiFi settings page on your
smartphone.
Select the network named "ZMD_SAP"
5
and connect to it.
Return to the Zmodo app page and
6
enter the name and password of
the WiFi network that you want your
Pivot to connect to. Note: the WiFi
name and password are case-
sensitive.
Tap to proceed.
√
4
Getting to know your Pivot
1
②
①
③
⑦
④
⑤
⑧
⑥
① Touch Pad ⑤ HD Camera
② Status Ring ⑥ Light Sensor
③ IR (Infrared) LED ⑦ Power Port
④ Microphone ⑧ Speaker
Using the Touch Pad:
To reset the Pivot, touch and hold for 10 seconds.
To enable bluetooth pairing, double-tap rapidly until you hear "Pairing".
What's in the box:
Pivot
Quick Start Guide
Pivot Door / window Power adapter Quick Guide
sensor (x2)
1
If you see this screen, the app will connect
7
your Pivot to your WiFi network. This
may take a few minutes. Once it's
completed, please skip to step 11.
If you do not see this screen, please
proceed to step 8.
If this app interface appears, please
8
press "Tap here to select WiFi".
Select the WiFi network that your
9
Pivot will connect to, and connect
to it. Return to the Zmodo app
once your mobile device is connected
to the WiFi network.
5

Mobile Setup

2
This quick start guide will help you configure your Pivot for
initial use. For detailed instructions and troubleshooting, please
visit:
www.zmodo.com/support

Before you begin:

Make sure that you have a strong WiFi connection at the
location of your Pivot. Visit www.zmodo.com/support
for advice on improving your WiFi signal range.
Power on your Pivot with the supplied power adapter.
Make sure you know the SSID (WiFi network name) and
password of the 2.4GHz WPA/WPA2 WiFi network that
you want your Pivot to connect to. Your network cannot
be hidden. Note: Pivot cannot connect to an SSID with
any space(s) in it. You can replace the space by entering
your router's settings. For example, "My Router" is not
allowed, but "My_Router" is allowed.
Download and install the "Zmodo" app from Google
Play or the App Store . Launch the app and sign up
TM TM
for a free Zmodo account. All of your devices will be
bound to this account.
Zmodo
We are constantly working to improve our product and app. Please visit
www.zmodo.com/support for updated instructions, manuals, and more.
2
10 The app will automatically search for
your Pivot and connect it to the
WiFi network. This may take a few
minutes.
Name your Pivot and set a password
11
for it. Tap to proceed.
√
Note: The password provides an additional
layer of security for your devices. You will not
need to use this password when accessing
your devices from the Zmodo app. It is not
required, but it is highly recommended.
Your Pivot has been successfully
12
configured!
Refer to the following pages to see
what your Pivot can do.
6
Log in and select the Add Device
1
option under the menu in the upper
left corner.
Select the "Standard" connection
2
method to connect your Pivot. Your
Pivot will be added to your Zmodo
account.
Tap to proceed (if you're setting up
√
3
multiple Pivots at once, tap + to
add additional units).
3
Monitor your doors and windows
3
When a door or window is opened, Pivot can automatically
turn to see what happened. Set up the included sensors by
removing the plastic tab and configuring the sensors in the
Pivot settings menu. When Pivot detects an opened
window or door, it will rotate to a preset location set in the
"Preset Setting" menu and capture a 30-second video clip.
Note: Install one sensor on the door or window frame, and the other
corresponding piece on the moveable part of the door or window. When
closed, the maximum distance between the two sensors should be 2cm.
7