AX1499 9” ACTIVE CLIP-ON HEADREST DVD PLAYER FEATURES • DVD/CD/VCD/MP3/WMA/DivX/MPEG4 Playback System • USB 2.0 Port • SD/MMC/MS Card Reader • AV Input • Earphone Socket • IR Transmitter (2 Ch for Wireless Headphones) • Wireless FM Modulator (8 Ch for Audio Output) •...
CONTENTS Functions.......................3 Remote Control....................4 Battery Installation Diagram for Remote Control........4 Installation......................5 Operation of DVD System................6 System Setup.......................6 Introduction of USB/SD Function..............8 Menu Function Setup..................8 Wiring Diagram....................9 Troubleshooting....................10 General........................11...
FUNCTIONS 1. Power and Video Switch 9. Remote Window 2. Next 10. Disc In/Out Slot 3. Previous 11. USB Port 4. Disc In/Out 12. SD Port 5. IR Window 13. Earphone Jack 6. Volume- 14. Video 2 Input 7. Menu/Play/Pause 15.
REMOTE CONTROL BATTERY INSTALLATION DIAGRAM FOR REMOTE CONTROL Attention 1. Do not touch the infrared lens. 2. Do not press remote control when disassembling the battery cover. 3. Remove the battery when not in use for an extended period of time. 1.
INSTALLATION 1. Pull out the 2 U-shaped metal holders from the mounting assembly. Remove the black plastic spacers. 2. Lift the original headrest. Choose the matching size black plastic spacer and split apart. Attach to the original car headrest post. Then insert the U-shaped metal holders to secure the 2 plastic rings.
OPERATION OF DVD SYSTEM Play DVD/DCD/CD When loading a disc into the DVD slot, please face the label to the back. (Recorded surface facing you). Play will start. Press on panel or on remote control to stop. Press on panel or on remote control to pause.
Page 7
SYSTEM SETUP (continued) 1. TV System: Set DVD image format to NTSC/PAL or AUTO. 2. Resume Play: Switch to resume play after power off. 3. Screen Saver: Switch off screen protection icon. 4. Screen Picture Ratio: Choose image output ratio as desired 5.
INTRODUCTION OF USB/SD FUNCTION 1. Enter: Press under DVD mode and switch to DVD, USB or SD mode. 2. Exit: Press under USB/SD mode and then switch to DVD mode. MENU FUNCTION SETUP In AV1 or AV2 mode, press on panel or on remote control to enter the main menu.
3. FUNCTION SETUP 1. Rotation 2. Image Display Mode 3. Reset AUDIO Press on panel or on remote control to set audio. FUNCTIONS Press on panel or on remote control then press panel or on remote control to set selection. WIRING DIAGRAM...
TROUBLESHOOTING Problem Comment No sound and image Power is disconnected. Turn the machine on. No image Disc is scratched. Signal wire is disconnected. No sound Volume too low or the volume setup needs checking. Black screen Incorrect setup of image brightness and contrast. Low voltage. Blurring and unstable image Disc is scratched.
GENERAL 1. Do not expose the device to wet, damp or hot environments. 2. Do not disassemble or attempt to repair. Should a problem arise, consult a qualified technician. 3. Do not use abrasive chemical cleaners on the LCD or cabinet. Please use a soft dry cloth.