Bluetooth
1
Select Settings > Connectivity > Bluetooth >
Visibility.
2
Press
to select Visibile, press
firm.
Search new devices
Before searching new devices, you need
•
Note
to switch on Bluetooth functions on both
devices and set both Visibility Visible to
On.
• A maximum of 30 Bluetooth devices can
be searched and paired at a time.
• Bluetooth Passcode (1 to 16 digits) is
required to connect Bluetooth devices;
sender and receiver must input the same
code to complete file transfers.
Bluetooth passcodes are not necessary
•
for paired devices.
1
Select Settings > Connectivity > Bluetooth >
Search new devices.
126
2
Select a device from the searched list and then
select Options > Pair to pair the device.
3
to con-
Enter Bluetooth passcode, and then press
to confirm.
• Enter the passcode for the receiving device in
15 seconds to complete the pair.
• For the Bluetooth headset, find the PIN code in
the Bluetooth headset user guide, and then
enter the PIN code.
4
If the pairing succeeds, a dialog box prompting
the pairing succeeds is displayed, and queries
whether to set the device as a trusted one.
5
You can select Yes or No to confirm or cancel it.
Select Settings > Connectivity > Bluetooth >
Devices. The paired devices are displayed in this list.
Select a device from the list, select Options, and you
can perform the following operations: