Related Manuals for Lumag HGS50058
Summary of Contents for Lumag HGS50058
- Page 1 Distribution Limited Petrol Flail Mower Operator’s Manual HGS50058 FOR YOUR SAFETY READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE OPERATING THIS MACHINE...
-
Page 3: Warranty Registration Form
For the warranty to be valid the Warranty Registration Form must be completed and returned to Lumag Distribution Limited within 14 days of the purchase, together with a copy of the purchase invoice. We will use your email to confirm that we have received the completed Warranty Registration Form and contact you about any errors or omissions on the form. - Page 5 All Other Moving Parts & Lubricate X (2) Cables 1 – First service only, 2 = Should be carried out by your Lumag Dealer, 3 = May need to be done more often in dusty areas & 4 = Replace paper element only...
- Page 9 - 2 6 -...
- Page 12 1. Subject of warranty The warranty applies to products and goods i) The defects claimed have been caused by supplied by MOTOR JIKOV Strojirenska a.s. unprofessional product storage j) The defects claimed have resulted from usual 2. Warranty period wear and tear following from regular use k) The product has been combined or operated The basic warranty period provided is 24 months with a device not approved by the manufacturer...
- Page 13 7. Machine lubrication If the machine is not to be used any more you must release the fuel and the oil fill into closed containers. The machine may then be stored or Dismantle the drive wheels from the provided to a professional organisation for phy- axle at the end of the season, clean them and fill sical liquidation, including the technical fluids.
- Page 14 1. Mowing knife replacement 3. Move adjustment Before knife replacement and before Move of the machine is adjusted with the every check of the mowing gear always disco- adjustment bolt on the lever line (1) (fig. 4,5,13) or with nnect the power terminal from the ignition spark. the bolt (2) (fig.
- Page 15 6. Stopping lawn mower 5316SLE 3. Operating lawn mowers 5316SBE, 5316SPE If you operate the machine with the horizontal bar Move the accelerator control lever on the right tilted down (4) fig. 13, hold the lever (3) fig. 13 by handlebar to MAX position.
- Page 16 ______ Check tightness and faultlessness of the mowing rotor knives. Before first starting the engine check the engine oil level with the dip gauge and replenish oil if necessary. 1. Installation of canvas holder Push the canvas arm with the canvas on into the right wheel hinge.
- Page 17 Business Name BDR 582 BDR 583 Order Number 5316 SE 5316 SBE 5316 SPE 5316 SLE Length 1360 mm 1400 mm Height 960 mm 1020 mm 1210 mm Transport Height 650 mm 710 mm Width 620 mm 620 mm 620 mm 660 mm Weight 58 kg...
- Page 18 The user takes full responsibility for inju- ■ Do not work on extremely steep slopes. Observe ries of other persons or damage to their property the maximum slope inclination specified in the by the mower. That is why the operator must wa- instruction for use of the machine.
- Page 19 Dear Customer, seated in the upper part of the box. The engine drives the mower gear via a transmission with a V-belt. The chassis consists of a gear-box with You have purchased one of the products worm drive and tooth clutch, which allow running of MOTOR JIKOV.
-
Page 20: Part Drawings
Distribution Limited PART DRAWINGS FOR YOUR SAFETY READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE OPERATING THIS MACHINE... - Page 21 HGS50058 / Motor ...
- Page 22 HGS50058 / Rotorabdeckung ...
- Page 23 HGS50058 / Mähgehäuse ...
- Page 24 HGS50058 / Getriebe ...
- Page 25 HGS50058 / Antriebsräder ...
- Page 26 HGS50058 / Mähroter ...
- Page 27 HGS50058 / Lenkholm ...
- Page 28 Unit 10, Hatchmoor Industrial Estate, Hatherleigh, Okehampton, Devon EX20 3LP www.lumag-gb.co.uk 01837 811741 Lumag Distribution Limited Company Number: 09267547 VAT Number: GB154566788 Hatherleigh Plant and Tool Hire is a trading name of Lumag Distribution LTD...
Need help?
Do you have a question about the HGS50058 and is the answer not in the manual?
Questions and answers