Advertisement
NL4-Nt INSTALLATION and OPERATION GUIDE
Attach GPS Receiver.
Plug the GPS Receiver into the NL4's PS2 connector. Note the
'ARROW' embossed into the connector. Orient the arrow at 12
o'clock, or away from the mounting flange. Fully insert the metal
shell/pins into the socket. Be sure to strain relief the GPS
Receiver cable/connector, with a cable tie to a nearby fixed
provision.
Reconnect the Battery.
Operation.
The NL4's sole function is to communicate speed data from the GPS Receiver to the Instrumentation (Dash) Computer Module.
The NL4 will in NO-WAY interfere or meddle with normal computer functions. The format of the NL4's speed output is an exact
match to the paddle-wheels, and is a seamless integration into the computer system.
On a 'cold start' (power turned on after a prolonged off period) the GPS Receiver will require 1 – 2 minutes to sync to the
seconds.
satellites. With a warm start, expect the satellite sync within 30
Calibration.
Follow the Speedometer Calibration instructions outlined in the Boat Manufacturer's Instruction Manual. Typically the Paddle-
wheel's speed will register 1 to 2 mph slower than the cleaner, faster NL4. A handheld GPS is a very useful speed reference.
Warranty.
Nautic Laugic warranties the NL4 for one year.
Should this product malfunction or fail, please return it so we can make it
right!! Please see our policies page at
www.nauticlaugic.com
THANK YOU FOR BUYING OUR PRODUCT!!
nautic Laugic
www.nauticlaugic.com
Page 3
Advertisement
