Advertisement
Quick Links
Reflection
Steam room Installation Instructions
IMPORTANT
Please read carefully the following instructions before installing your shower cabin. If you
have any questions on this shower cabin installation - please call our technical support
specialists Monday to Friday 9:00AM – 5:00PM EST at 1-866-731-8378 Option 3 or e-
mail our technical support group at
support@BathAuthority.com
Our product may have changes without prior notice
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Dreamline Reflection
Summary of Contents for Dreamline Reflection
- Page 1 Reflection Steam room Installation Instructions IMPORTANT Please read carefully the following instructions before installing your shower cabin. If you have any questions on this shower cabin installation - please call our technical support specialists Monday to Friday 9:00AM – 5:00PM EST at 1-866-731-8378 Option 3 or e- mail our technical support group at support@BathAuthority.com...
- Page 2 WARNING Please, make sure you do the following: Electrical grounding is required on the steam generator; All electrical supplies must be disconnected when servicing the steam generator; All wiring must be installed by a licensed electrician (please consult your local codes); All plumbing must be installed by a licensed plumber (please, consult your local codes);...
-
Page 3: Tools Required
3 business days or if the product has been installed. Contact your distributor or DreamLine if you have any questions. 2. Please note that you should consult your local building codes on questions on installation compliance standards. -
Page 4: Packing List
21 Bolt M5×8 8pcs 11 Round head screw ST4.2×16 14pcs 22 Bolt M6×25 (with washer) 2pcs After you have checked that all components are there, you will be ready to start the installation of your DreamLine shower cabin. Rev. 1.2. - Page 5 Cabin Installation Choose the location where you will be installing the tray, mark the location of the tray because you may need to move it out from the position for better assembling procedure. Check on the drain if it is fastened tight enough to make sure it won’t leak after complete tray installation.
- Page 6 16. Do not move the cabin into the place until you check all the components for any leakage or problems; open each valve to see how it works, check thermostatic or mixer valve for hot and cold water. You may need to tight some connections (during storage and transportation connections may get loose).
- Page 7 Fig 2 Fig 3 Fig 4 Fig 5 Rev. 1.2.
- Page 8 ￠3mm ￠3mm Fig 6 Fig 7 Fig 8 Fig 9 Rev. 1.2.
- Page 9 Fig 10 Fig 11 Fig 12 Fig 13 Rev. 1.2.
- Page 10 Blue Cool Fig 14 Fig 15 Fig 16 Fig 17 Rev. 1.2.
- Page 11 Fig 18 Fig 19 Thermostatic Valve Using Controls Valve “a” turns on water of the “tropical rain” head shower. Valve “b” turns on water of eight massage jets. Valve “c” turns on water of the hand shower. Turn the revolve cover of O FF the shower head will change water pattern.
- Page 12 Warnings Do not connect this steam shower with other electric appliances not recommended by DreamLine™, and do not take apart the hermetically sealed lines or the electric lines from the power box. A drainage pipeline shall be fixed to auto-drain valve of the main steam generator, and it’s better to add a water filter before the water entrance to increase generator’s...
-
Page 13: Product Maintenance
Product Maintenance 1. Tempered glass can be clean with nonabrasive bathroom cleaner or any glass cleaner you use elsewhere in your home. Rinse off any glass cleaner that gets on the aluminum as soon as possible to avoid damage to the anodized surface. Avoid striking it with any sharp or hard objects.
Need help?
Do you have a question about the Reflection and is the answer not in the manual?
Questions and answers