Hope Industrial Systems KVM2-PED-PS2 Installation Instructions page 2

Pedestal-mounted ps2/serial kvm extender

Pedestal-Mounted PS2 KVM Extender Instructions (continued)

9. Finish installation.

a. Connect the video cable to the VGA port on the KVM Remote Module and tighten the screw locks. For touch screen units,

connect the 6' RS-232 cable to the serial port on the KVM Remote Module and tighten the screw locks.

b. Arrange cables coming up through the pedestal so the KVM assembly (and cables already attached) can slip into the pedestal

with the KVM bracket flush against the back side of the pedestal. Lower the KVM assembly into the pedestal and temporarily

hold the assembly to prevent it from falling all the way into the pedestal.

c. Attach the KVM bracket to the pedestal with the provided two 6-32 screws and washers. Use stainless steel screws for

stainless steel pedestals or black screws for black pedestals.

d. Complete installation of the monitor per the instructions in the user manual, along with the video cable, power cable, PS2 cable

(for keyboards), and RS-232 cable (for touch screen units) from the KVM Remote Module into the Universal Mount Monitor.

Secure the screw locks on the video and RS-232 cables.