Page 1
IoT-Cloud 2.0 Configuration Software User Guide 1. Connect IoT-Cloud to the PC using a MicroUSB cable. Flip the power switch to the right. If you plan to use IoT-Cloud while connected to a secondary Ethernet port on your computer, plug in an Ethernet cable to IoT-Cloud and the PC as well.
Page 2
3. Once the port is opened, the log will display the PC name, local IP address, and local gateway. 4. Click the Connect button to retrieve IoT-Cloud’s MAC address, IP address, port, and gateway. If successful, the log will indicate the status “Connected!” X-Z LAB, Inc. Bishop Ranch 6 2440 Camino Ramon, Suite #264...
Page 3
6. Open RadSuite-Monitor and click on the gear icon. Click on System Settings and enter IoT- Cloud’s IP address and port, which were configured in step 8. Click OK to save changes. Once a proper Ethernet connection is established, IoT-Cloud will connect to RadSuite-Monitor. X-Z LAB, Inc. Bishop Ranch 6 2440 Camino Ramon, Suite #264...