Outdoor Security Light Installation Instructions
WARNING:
1. To avoid fire, shock, or death, disconnect power at circuit breaker or fuse before the installation.
2. If you are unsure about the installation or maintenance of the Security Lights, please consult a qualified electrician.
SAFETY:
1. Please read all warnings and instructions before installation.
2. The fixture must be wired in accordance with the National Electric Code and applicable local codes or ordinances.
3. To insure personal safety, proper grounding is required.
INSTALLATION NOTES:
1. This fixture should not be used in areas with limited ventilation or high ambient temperature exceeding 45°C.
2. Fixture cannot be used with a dimmer switch, motion sensor and other electronic switching devices.
INSTALLATION LOCATION:
This fixture must only be wall-mounted. Be certain that the receiving junction box is well secured and can support
the weight of the lamp.
PRODUCT DIMENSIONS:
6.88"
175mm
PRODUCT SPECIFICATION:
Part Number: MEL-S20100W, MEL-S20100B
Input Voltage: 120 VAC
Amp Draw: 0.16 A
Frequency: 60 Hz
Rated Power: 20W
Suitable for: Wet Locations
THREE YEAR WARRANTY:
Maxxima extends a 3 year limited warranty to the original purchase that the products listed are free from defects in material and/or
workmanship only. Maxxima will replace any warrantied product to the original consumer/purchaser if the product fails because of
defects due to workmanship and/or materials within the limited warranty period. Limited warranty is not transferable and applies to
the original installation of the Maxxima product. This offer does not constitute in any way a product guarantee and Maxxima does not
hereby assume any obligation whatsoever beyond sending a free replacement product.
3.07"
78mm
6.91"
176mm
4.21"
107mm
4.09"
104mm
www.maxximastyle.com