Advertisement
Quick Links
Innovative Technology
for a Connected World
General DesCripTion
The MTTC-1410 Thermoelectric Temperature Controller is a precision instrument that utilizes Pulse Width
Modulation (PWM) control technology to provide accurate temperature control of thermoelectric devices.
The MTTC-1410 is a bi directional controller with selectable voltage output and a full "H" bridge capable
of load currents of up to ten amperes. The unit's LED front control panel can be used to adjust the setpoint
temperature, to view the current temperature, or to fine-tune the control parameters for higher accuracy or
faster response.
speCifiCaTions anD feaTures
1
2
global
solutions:
local
Americas: +1.888.246.9050
Europe: +46.31.704.67.57
Asia: +86.755.2714.1166
CLV-customerservice@lairdtech.com
www.lairdtech.com/thermal
• Input Power: 110(1.5A)/220VAC(0.8A), 50~60Hz
• Range of selectable DC output voltages: 3, 7, 12, and 14 VDC (PWM)
• Maximum Output Current: 10A
• Control temperature range: -100°C to 200°C
• Control stability: 0.1°C/24h
• Temperature sensor: 2 wire Pt1000 RTD (included)
• Control output: Proportional control with automatic reset and rate (PID),
500 Hz Pulse Width Modulation (PWM)
• Dimensions: 15cm (5.9") x 12.5cm (4.9") x 26cm (10.2")
• 3.5 digit LED display, 4 button user interface
• Extra terminals for constant 12VDC fan operation (up to 1 Ampere)
Available ranges for settings
Item
Setpoint
Proportional band
Integral (reset time)
Derivative (rate time)
Calibration offset
Number shown only as an example of the display.
–100.0°C will show as "-00.0" in the display.
support
TM
Display
Range
88.8
-100.0
– 199.9
1
2
P000
0 – 20
1
A000
0 – 250
1
D000
1
0 – 100
C00.0
-5.0 – 5.0
1
MTTC-1410
User Manual
Units
°C
%
Seconds
Seconds
°C
Advertisement
Summary of Contents for Laird MTTC-1410
- Page 1 Modulation (PWM) control technology to provide accurate temperature control of thermoelectric devices. The MTTC-1410 is a bi directional controller with selectable voltage output and a full “H” bridge capable of load currents of up to ten amperes. The unit’s LED front control panel can be used to adjust the setpoint temperature, to view the current temperature, or to fine-tune the control parameters for higher accuracy or faster response.
-
Page 2: Product Handling
Manual Do not operate this unit before reading this manual. The MTTC-1410 was designed, built, and packaged to withstand the shock and vibration normally associated with shipment by common carriers. Occasionally, improper handling during shipment, such as excessive vibration, crushing, etc., will cause damage to the product. Therefore, a thorough inspection should be provided upon receipt of all shipments. - Page 3 6. Connect your Thermoelectric Cooler (TEC) to the screw terminals located in the lower left corner. Polarity is critical here; if you are not certain of the TEC’s polarity, please contact Laird Technologies. 7. If you have a 12VDC fan, connect it to the screw terminals for the fan.
-
Page 4: Controller Adjustment
MTTC-1410 Temperature Controller user ConTroller aDjusTMenT Manual Figure 3 - User Interface Figure 4 - Functions Menu In Figure 4, red represents solidly lit digits, while blue represents a blinking digit. The value of a blinking digit can be changed by pressing the “Up” or “Down” keys. Pressing the cycle key (“ ”) changes the position of the blink- ing digit one step to the left. -
Page 5: Warranty
Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2010 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. - Page 6 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Laird TC-AC-MTTC-1410...