Summary of Contents for Security Tronix ST-HDLED18.5
Page 1
19-inch LCD Display Unit ST-HDLED18.5 User Manual www.securitytronix.com...
Page 2
Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact us. This manual may contain technical or printing errors, and the content is subject to change without notice. The updates will be added into the new version of this manual. For further assistance please contact technical support at 1-800-688-9282, press 3 then 2.
Regulatory Information 2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.
Page 4
19-inch LCD Display Unit User’s Manual This manual, as well as the software described in it, is furnished under license and may be used or copied only in accordance with the terms of such license. The content of this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment.
Chapter2. Device Interfaces Figure 2.1 Rear Panel of Device Inte rfaces Description POWER IN Power Input HDMI IN HDMI Digital Signal Input VGA IN VGA Analog Signal Input...
Chapter3. Panel Keys Keys on the lower right corner of the display unit panel are shown in Figure 3.1 Figure 3.1 Keys on the Display Unit The functions of the keys on lower right corner of the display unit vary according to different situations.
Chapter4. Basic Operation 4.1 Contrast T urn on the display unit when the power supply is on and input source is confirmed. Press key of the remote controller to enter the ◄ menu as shown on the right. press ◄ or ► to adjust the Press MENU to accomplish the value of contrast.
4.4 Main Menu 4.4.1 Image Settings Purpose: You can adjust the picture parameters by switching image modes and adjust the values of contrast, brightness, color temperature, auto adjust, color adjust. Steps: Press Menu key to enter the main menu interface as shown below. 2.
4.4.2 Image Adjustment Purpose: When the input source is selected VGA, you can adjust the VGA parameters. It is for adjusting VGA H position, V Position, clock and phase. Steps: 1. Press Menu key to enter the main menu interface. 2.
4.4.3 OSD Setting Purpose: You can set the language, blending and OSD duration of the menu. Steps: 1. Press MENU key to enter the main menu interface. 2. Press ◄ key twice and press MENU key to enter the 【Language】 interface, press ◄ or ► to switch the language you want.
4.4.4 Other Settings Purpose: You can set Mode, Signal Source, Aspect Ratio, DCR. Steps: 1. Press MENU key to enter the main menu interface. 2. Press triple◄ key and press MENU key to enter the Mode interface, press ◄ or ► to switch the mode between PC/GAME/MOVIE.
4.4.5 Reset Setting Purpose: You can reset settings to the factory defaults. Steps: 1.Press MENU key to enter the main menu interface. reset settings to the factory defaults. 2.Press ◄ key 4 times and press MENU key to Figure 4.4.5 Reset Setting...
Appendix: Specifications Device Model ST-HDLED18.5 Display Type TFT-LED Backlight Screen Size 18.5" Dot Pitch 0.300×0.300 mm Max Resolution 1366×768 Best Operation Resolution 1366×768@60Hz Brightness 200cd/m² Contrast 600:1 Response Time Color 16.7M Viewable Area 409.8×230.4mm Viewing Angle Horizontal 90°, Vertical 65º...
Page 17
SECURITYTRONIX 1-Year Limited LED Display Warranty Securitytronix. (the "Company") warrants to the Original Purchaser that the LED Display is free from defects in workmanship or material under normal use. This warranty starts on the date of shipment of the hardware to the Original Purchaser. During the warranty period, the Company agrees to repair or replace, at its sole option, without charge to Original Purchaser, any defective component in the LED Display.