Qomo QConnect-1700 Quick Installation Manual page 5

QCT
6. Windows
• Do not support Windows Phone, Windows RT
• 6.1 Install the application
1) Make sure your PC is WiFi-enabled, and connect your PC to the
QConnect-1700
name (SSID) of your QConnect-1700 box on the standby screen of the
the projector/display. [Default SSID is QConnect-1700]
2) Open your browser, and enter the IP address of your QConnect-1700
address on the standby screen of the projector/display.
[Default IP address is 192.168.100.10]
QConnect-1700
QConnect-1700
4