Maintenance; Battery - MBH TD-3140 Owner's Manual

MAINTENANCE

Battery

Your meter comes with four (4) 1.5 V AAA size alkaline batteries.
Low Battery Signal
The meter will display either of the two messages below to alert you
when the meter power is getting low.
Replacing the Battery
To replace the batteries, make sure the meter is turned off.
1. Press the edge of the battery cover and lift it up to remove.
2. Remove the old batteries.
3. Replace with four 1.5 V AAA size alkaline batteries in accordance
With the mark +/- indication in the battery compartment.
4. Close the battery cover.
NOTE:
• As with all small batteries, these batteries should be kept away from small
children. If swallowed, promptly seek medical assistance.
• Batteries might leak chemicals if unused for a long time. Remove the
batteries if you are not going to use the device for an extended period (i.e.,
3 months or more).
• Properly dispose the batteries according to your local environmental
regulations.
1. The symbol appears along with
display messages: The meter is
functional and the result remains
accurate, but it is time to change the
batteries.
2. The symbol appears with E-b: The
power is not enough to do a test. You
must change the batteries immediately.
17