Behringer iSTUDIO iS202 Quick Start Manual page 7

12 iSTUDIO iS202
iSTUDIO iS202 Controls
(3)
(1)
(2)
(4)
(6)
(7)
(8)
(9)
(10) (5)
(15)
(13) (14) (16) (17) (18) (19)
(25)
(24)
(11) (20) (12)
(21) (22) (23)
iStudio
P16-MB
13 Quick Start Guide
Step 2: Controls
(EN)
(12) connects to the ground wire on
(1)
1 & 2 button engages +12 V
a turntable to prevent the pick up
phantom power for condenser
of electromagnetic interference.
microphones on channels 1 & 2
XLR inputs.
(13) ON/OFF POWER button turns the
unit on or off .
(2)
Input 1 Gain Knob adjusts the
input level of audio sources
(14) DC IN connects to adapter and then
connected to the combination
to the mains to power the unit.
¼ "/ XLR connector for channel 1.
(15) VIDEO OUT output connects to
(3) 2 button engages Hi-Z input
an external monitor or projector
on channel 2 ¼ " input.
for displaying video images or
visual accompaniments.
(4) Input 2 Gain Knob adjusts the
input level of audio sources
(16)
USB MIDI connects to a computer
connected to the combination
via USB cable for MIDI control
¼ "/XLR connector for channel 2.
and iPad app integration within
DAW software.
(5) Aux button engages phono
level input for use when a
(17)
MIDI OUT connects to external
turntable is connected to the
MIDI controllers and input devices.
LINE/PHONO AUX RCA inputs.
(18)
MIDI IN connects to external MIDI
(6) Aux Input Gain Knob adjusts
sound modules for iPad control.
the input level of audio sources
(19)
EXP FOOT CTRL connects ¼ " input
connected to the LINE/PHONO
to an external expression pedal.
AUX RCA inputs.
(20)
L/R MAIN output connects to
(7)
Monitor (1 / 2 / Aux – iPad)
powered speakers for performance
Knob adjusts the balance
or studio monitoring.
between iStudio input levels
and iPad output levels for low
(21) LINE/PHONO AUX L/R inputs
latency monitoring via the
connect to line level RCA
"Phones" connector.
inputsources (CD players,
MP3 players, etc.) or to a turntable
(8)
Main Output Knob adjusts the
(
volume level of the main outputs.
be engaged).
(9)
Phones Output Knob adjusts
the output volume to the
headphones connector.
(10) Phones output to
1⁄8" headphones connector.
(11) SW FOOT CTRL connects ¼ " input
to an external foot switch.
(22) MIC/LINE/GUITAR 2 connects
input from microphones and
instruments via combination
¼ " TRS/XLR connectors.
The ¼ " TRS input on channel 2
can be used with electric guitar
level signal when the
button is engaged.
(23)
MIC/LINE 1 connects input
from microphones and
instruments via combination
¼ " TRS/XLR connectors.
Both channels 1 & 2 can be used
with condenser microphones
when the button
is engaged.
(24)
BATTERY COMPARTMENT
eight 1.5-Volt "AA" batteries
can power the iStudio for
mobile operation.
(25) Mounting Brackets connect the
iStudio to the optional P16-MB
for use with microphone, music,
and drum stands.
Aux power button must
Hi-Z