Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for KEYA CON3
- Page 1 CON3/140621...
- Page 2 S A U N A C O N T R O L switch 9. Lamp switch 10. Heating indicator TIME Figure 1 Sauna control panel CON3 ON/OFF Press “ON/OFF” button to turn on the control panel, system enters waiting mode if applicable or heat-up mode depending on user's setting.
- Page 3 CHANGE HEATING TIME SETTING Press “SET TIME” button to adjust the heating time. Press “▲”or “▼” to adjust minute value in the range of 1～60. Press “SET TIME” again to confirm. For example, the default heating time is 45 minutes, and displayed as “–45”. CHANGE WAITING TIME SETTING Hold “...
- Page 4 HINT MESSAGE 1) Temperature below 43℉ (6℃): LED screen displays“－L ”. 2) Temperature above 221℉ (105℃): LED screen displays“－H ”, system could not heat up. 3) Communication error ： Communication error between panel and mainboard, LED screen displays“ EE”. 4) Heating-up indicator “ ”: The red indicator is on when system heats 5) Heat preserving “...
- Page 5 L4 L4 Terminal Control Box 240VAC 60Hz Notice: The Neutral wire (N) is not POWER SUPPLY necessary if customer do not install the bulb nor the fan. Sauan Heater 3-9kW CON3 Sauna Control System Wiring Diagram 3～9kW 240VAC 60Hz Figure 2...
- Page 6 Control Box 208-240V 3N～ 50/60Hz POWER SUPPLY Notice: The Neutral wire (N) is not necessary if customer do not install the bulb nor the fan. Sauan Heater 3-9kW CON3 Sauna Control System Wiring Diagram 3～9kW 208-240V 3N～ 50/60Hz Figure 3...
- Page 7 240VAC 60Hz POWER SUPPLY Notice: The Neutral wire (N) is not L3 L3 L3 L4 necessary if customer do not install the bulb nor the fan. Sauan Heater 10.5～25kW CON3 Sauna Control System Wiring Diagram 10.5～25kW 240VAC 60Hz Figure 4...
- Page 8 Control Box 208-240V 3N～ 50/60Hz POWER SUPPLY Notice: The Neutral wire (N) is not necessary if customer do not install the bulb nor the fan. Sauan Heater 10.5～25kW CON3 Sauna Control System Wiring Diagram 10.5～25kW 208-240V 3N～ 50/60Hz Figure 5...
Need help?
Do you have a question about the CON3 and is the answer not in the manual?
Questions and answers