Mobotix MX-Keypad1-EXT Quick Install Manual

Quick Install
MOBOTIX KeypadRFID
MX-Keypad1-EXT
(in triple frame silver)
• Keypad module with 1 admin and 5 user RFID cards
• Mailbox control
• Integrated RFID technology for keyless entry
• Available colors: white, silver, dark gray, black, amber
• Up to 60 hrs backup power supply using DoorMaster
(accessory)
IP Video Door Station, InfoModule and DoorMaster
IP Video Door Station
KeypadRFID
InfoModule

Installing the KeypadRFID

Installing the module follows the procedure described in the T24 System Manual
Part 1, in Section 2.4.2, "Installing the KeypadRFID" . For more information on other
connection variants (e.g. without DoorMaster), please see Section 2.1, "Overview:
Connection and Wiring Diagrams" .
When installing the module in the frame, make sure that you insert the right side
of the module first and then press on the left edge (and not on the center) to
click the module into place.

Operation

After installing, make sure that you follow the steps in the T24 System Manual Part 2 in Section 2, "Initial Operation
without PC" . This chapter shows you how to configure the entire system (including the RFID admin and user cards)
in a few simple steps.

Replacing the KeypadRFID

If the KeypadRFID needs to be replaced against all expectations, you need a current backup of the system
configuration. This will ensure that you can seamlessly integrate the new KeypadRFID into the system later on.
Please follow the steps outlined in the T24 System Manual Part 2 in Section 5.2, "Backup & Restore" .
To dismount the KeypadRFID, follow the steps in the T24 System Manual Part 1 in Section 2.4.6, "Removing and
Exchanging Modules" . Make sure that you deactivate the theft protection before dismounting the module and
that you activate the theft protection again after re-installing.
HiRes Video Innovations
The German company MOBOTIX AG is known as the leading pioneer in network camera technology and its decen-
tralized concept has made high-resolution video systems cost-efficient.
MOBOTIX AG • D-67722 Langmeil • Phone: +49 6302 9816-103 • Fax: +49 6302 9816-190 • sales@mobotix.com
RFID cards
for keyless entry included
(1 admin card, 5 user cards)
Standard Connection:
Outdoor
2
2
MxBus (YSTY 0.8 mm – max. length: 50 m/55 yd)
Theft protection (YSTY 0.8 mm – max. length: 50 m/55 yd)
For additional information on the other connection variants and for installing,
see the T24 System Manual Part 1 on www.mobotix.com > Support > Manuals.
Back view with cover removed
I/O terminal
KeypadRFID
Keypad with Contactless
Module for MOBOTIX IP Video Door Station
Keyless access to buildings using RFID transponder
card or PIN code
KeypadRFID with
Door
Door opener, door sensor, lock sensor
(YSTY 0.8 mm – max. length: 50 m/55 yd)
6
Security-Vision-Systems
RFID Technology
Indoor
DoorMaster
Sealing plug
Seal
MxBus terminal
2
Click
1