Power As long as there are batteries in the device it is powered up. The BrailleCoach™ device “goes to sleep” after a few seconds of not speaking. It draws very little power in sleep mode. You do not need to remove the batteries unless they are exhausted or you plan to store the device for an extended period of time.
EN 301 489-3 V1.4.1 Note: By default the BrailleCoach™ teaching device will record a 2-second sound (if you press and release the activation button in step 7). However, if you press and hold the blank tag you can extend the recording The Technical Construction File required by this Directive is maintained at the time up to 8 seconds.
15 of the FCC Rules. These limits are designed to provide reasonable protection against The vocabulary/tag sets are stored on the SD card in your BrailleCoach. The SD (memory) card can be harmful interference in a residential installation. This equipment generates, uses, and can radiate radio changed or updated in the event that new Braille tags become available.
Troubleshooting Specifications The BrailleCoach™ teaching device should provide many years of trouble free service. If the device Dimensions 7.75” x 4” x 1” / 19.7cm x 10.2cm x 2.5 cm is damaged or stops working there are a few things you can do to determine the problem. In some Weight 0.7 lbs/318gms with batteries...