Reassembly Notes
•
Plug in the power cord and turn on the television. If the lamp does not turn on after the warm-up period,
reinstall the lamp module by repeating the steps above.
•
To properly track the life of the new lamp, reset the lamp time counter to zero:
a. On the remote control, press Menu.
b. Use the arrow buttons to select the Setup menu, then press OK.
c. Use the arrow buttons to select About, then press OK.
d. Press the right-arrow button three times. This displays the User Service screen.
e. Press the red button to reset the lamp time counter, then press OK.
40
Disassembly Procedures