909 S909 Instruction Manual

2400w shredder with bucket

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

INSTRUCTION MANUAL

S909

2400W

SHREDDER

WITH BUCKET

Table of Contents

Need help?

Do you have a question about the S909 and is the answer not in the manual?

Questions and answers

Summary of Contents for 909 S909

Page 1 INSTRUCTION MANUAL S909 2400W SHREDDER WITH BUCKET...
Page 2: Table Of Contents
CONTENTS Warranty Warranty Power Tools Introduction For full details please visit us at www.909.com Environmental protection Description of symbols Specifications General safety rules Additional safety rules for shredders Accessories Unpacking Know your product Assembly Operation of the shredder Fitting the bucket...
Page 3: Environmental Protection
Read these instructions for use carefully. special care to heed the Cautions and Warnings. Wear protective gloves. Your 909 power tool has many features that will make your job faster and easier. Safety, performance, and WARNING. Keep spectators away. Beware of dependability have been given top priority in the objects being flung out.
Page 4: General Safety Rules
General safety rules e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord WARNING. Read all safety warnings and all instructions. suitable for outdoor use reduces the risk of Failure to follow the warnings and instructions may result in electric shock.
Page 5: Additional Safety Rules For Shredders
4) Power tool use and care 5) Service a) Do not force the power tool. Use the correct power a) Have your power tool serviced by a qualified repair tool for your application. person using only identical replacement parts. This The correct power tool will do the job better and safer at the rate for which it was will ensure that the safety of the power tool is...
Page 6: Accessories
If the fuse blows or if the overload protection is triggered, this is a sign that the machine is overloaded and/or The 909 Shredder is supplied with the following accessories that too many appliances are connected to the same as standard: extension cable.
Page 7: Know Your Product
Know your product 11. Spanner (not shown) 1. Shredder body 12. Wheel bush (x 2) 2. On/off switch 13. Bin catch release 3. Bucket 14. Washer (x 6) 4. Overload protection button 15. Nut (x 2) 5. Handle 16. Allen key 6.
Page 8: Assembly
Assembly 6. Slide a wheel on each space on each end of the axle. 7. Fit a flat washer on the thread section on each end Remove products of the axle. and all contents from the carton. Remove plastic wraps and protective inserts.
Page 9: Fitting The Bucket
Mulching Stopping the motor To stop the shredder press the The following types of material can be shredded in the On/ Off switch on the portion shredder: of the switch marked O. • Twigs and branches. WARNING. Do not feed in any •...
Page 10: Composting
IMPORTANT 4. Roll back the top cover exposing the cutter disc. During the mulching process, constantly check the debris 5. Remove any jammed is feeding into the large bucket. Do Not allow the bucket to branches jamming the exceed 75% capacity with mulch as debris can be restricted cutter.
Page 11: Maintenance And Storage Information
Maintenance and storage information Remove fully any debris built up in the hex recess of the counter sunk screw heads. WARNING. Prior to cleaning or any maintenance, always Using the Hex Key provided, ensure the power plug has been removed from the remove the screws holding electrical power supply.