Page 2
This MASTERFORCE® brand tool carries our 90-Day Money Back Guarantee. SAVE THIS MANUAL If you are not completely satisfied with your MASTERFORCE® brand power tool for any reason within ninety (90) days from the date of purchase, return the tool with your original receipt to any MENARDS®...
Page 3
FUNCTIONS SAFETY 15. Make sure your work platform is sufficiently sturdy to do the specific job at hand Height Adjustment (seven levels). 16. Properly anchor blade for job being done. a. Turn the height adjustment knobs counter-clockwise on each leg to loosen (fig. 1). 17.
Page 4
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 1. Attach four leg feet (8) to the leg frame (4). 2. Attach cross bar (3) to the two elevating rods (2) with M6 x 35 hex bolts (9), M6 Nylon nuts (11) and M6 washers (12). Make sure the seven pre-drilled holes on both elevating rods are on the opposite side and the adjusting knobs are on the outside of the assembly.
Need help?
Do you have a question about the 240-1579 and is the answer not in the manual?
Questions and answers