User Manual 10.1” ROOF MOUNT DVD PLAYER Model No. DV1107FL CONTENTS Features ...............1 Specifications .............1 Functions ..............2 Installation ..............3 Remote control ............4 Troubleshooting issues ...........5 Operation of DVD system ........6 USB/SD function ............8 Menu function setup ..........8...
FEATURES • DVD player • Thin design, combined with crystal glass style top panel • Digital display, sharp image and no interference • Transmission frequency range of audio signal: FM87.7MHz/FM88.1 MHz/FM88.5MHz/ FM88.9MHz/ FM106.7MHz/FM107.1MHz/FM107.5MHz/FM107.9MHz. • Audio/video input and output • Fully functional remote operation •...
FUNCTIONS Power switch and mode switch Analogue- and next song Play and pause Light switch Down and in/out Standby switch and stop Open key Analogue+ and last song DVD/disc slot Menu - 2 -...
INSTALLATION 1. Remove four screws on the bottom and disassemble metallic support, as picture 1. 2. Fix the top metallic support to the roof section, as picture 2. Make room for the wire (please be careful to not damage the top of the machine). 3.
REMOTE CONTROL Battery installation diagram for remote control 1. Do not directly touch infrared light. 2. Do not press remote control when disassembling the battery cover of remote control. 3. Remove battery when not in use for extended periods. 4. Normal battery life is approximately one year. Replace battery when the remote control is not sensitive.
Audio frequency Press on panel or on remote control and the screen displays menu, then press on panel or on remote control to select accordingly. Volume Audio control, (you can choose infrared/speaker/radio/speaker, speaker/radio, infrared/speaker/radio, radio, infrared, infrared/speaker, infrared/radio) Functions Press on panel or on remote control and the screen displays below menu pictures, then press...
OPERATION OF DVD SYSTEM Play DVD/DCD/CD Put the DVD disc into the DVD slot with the label of disc upwards. Unit will commence autoplay. Press on panel or on remote control to stop. Press on panel or on remote control to pause. Play MP3 Insert the file storage media into the appropriate media file input and unit will commence autoplay.
Page 9
1. Television system: set DVD output image format. Three available formats NTSC/PAL/AUTO can be chosen. 2. Resume play: system will connect to play once power is resumed. 3. Screen protection: screen protection can be selected. 4. Screen picture ratio: choose image output ratio as per request. 5.
USB/SD FUNCTION 1. Insert SD card or USB. Choose the appropriate media input and press under DVD mode to select the required mode. 2. Stop: press under USB/SD mode and then switch to DVD mode. MENU FUNCTION SETUP Press on panel or on remote control for main menu.
3. Functional Setup 1. Language setup 2. Flip setup 3. Image display setup 4. System Setup 1. Colour mode adjustment 2. Accompanying sound adjustment 3. Channel swap 4. Copy Note: This function only applies to the model type with TV function availability. 5.
Page 12
Contact us for servicing, warranty enquiries and general product information. Phone: 1300 366 024 Email: sales@nce.com.au nce.com.au Address: 34-48 Stanley Drive, Somerton VIC 3062, Australia...