MODULATOR YPbPr & CVBS TO DVB-T DIGITAL RF SD4250 USER MANUAL All-in-one encoder and modulator for dual SD source. Allows 4 sets of Audio/Video source to be extended throughout a traditional coaxial by encoding the SD service to MPEG2 and distributing this service using the DVB-T standard used in Europe, Australia and New Zealand.
PRODUCT INTRODUCTION 1. RJ45 port for remote upgrade or setup. 6. Grounding: to connect the earth cable 2. LCD Window 7. AC 110-240V: power input 3. Indicators 8. RF out: to distribute modulated signal 4. Control Buttons 9. RF in: to combine input RF signal 5.
Technical Specifications System Management Local control: LCD + control buttons/ Remote:RJ-45 web setting Language English LCN Insertion Upgrade RJ-45 web setting General Power AC110-220 Dimensions 440*280*44mm Weight < 2.5 kg Operation temperature 0~45 ℃ SAFETY INSTRUCTION Safety Technical Specifications WARNING: Hot plug is not allowed since it may cause system failure. To prevent fire or electrical shock.
Installations RISK OF damage to the unit Mechanically handling the unit may result in damage. Do not connect the unit to the power supply before or during assembly. Connect the unit as below instructed. NO HOT PLUG! 1. Connect cables to audio/video source. The signal source can be from a surveillance monitor, DVD, set-top box, CCTV and etc.
OPERATIONS OF TS CREATOR SOFTWARE Enter the SD4250 IP address, click Enter to access the Welcome screen. Enter the default password, click Enter. It will trigger an operation interface like below: On the top screen you can see 4 selections:...
Page 6
Click Audio Bit Rate to adjust the parameters. Click the sign V to choose bit rate : 4~12Mbps, and it will show √ OK. Click Save to save setting, press Cancel to cancel setting. Using the same way to adjust the parameter. System Click System Click Set Password...
Page 7
Device Operations and Management SD4250 is controlled and managed through the key board and LCD display. LCD Display - It presents the selected menu and the parameter settings. The backlight in the display is on when the power is applied.
Page 8
Down Right Left ENTER Booting SD4250 ○ Video in Status DVB-T 473.500MHz - Port Number - Video Source ○ Top Menu Encoder Encoder Video in Status - Resolution - Bit Rate Select Source - Port Number ○ Encoder Select Source...
Page 9
Top Menu Stream Stream Set PID - Port Number - PMT PID ○ - PCR PID - Video PID - Audio PID Stream Rtrv Status - Port Number - TS ID - Origin Network ID - Network ID - Network Name - Network Version - Service Name - LCN...
Page 10
1. Model name SD4250; Frequency 473.500MHz Encoder 2. Video in Status: User can enter the items respectively to view the video status. 3. Source: Select input source CVBS or YPbPr. 4. Video Bit Rate: Select bit rate range 4~12Mbps. 5. Adjust Color: User can adjust vales of items (Brightness & Contrast & Saturation & Hue: range 0~50).
Page 11
TV STANSARDS Digital Digital Digital Channel Channel Channel central central central Channel Frequency Channel Frequency Channel Frequency Frequency Frequency Frequency Standard B + G Europ Band I 318-326 BandV 47-54 50.5 326-334 606-614 54-61 57.5 334-342 614-662 61-68 64.5 342-350 622-630 Band S 350-358...
Need help?
Do you have a question about the SD4250 and is the answer not in the manual?
Questions and answers