Related Manuals for Kleton PC939
Summary of Contents for Kleton PC939
-
Page 1: Instruction Manual
Instruction Manual PC939 Polypropylene and Polyester Strapping Tensioner Tightening Handle Base Handle Gripper Plate Cutter Windlass... - Page 2 PC939 INSTRUCTIONS How to use a polypropylene & polyester strapping tensioner 1. Threading tensioner • Wrap both ends of strapping around product. • Squeeze handle and base together. • Insert the shorter end of strapping under the gripper plate and cutter wheel leaving approximately 5” of strapping off the front end. • Release handle and base. • Feed the other end through the cutter wheel and up through the windlass. • Put strapping as tight as possible. 2. Tensioning • Move tightening handle forward and back to begin tensioning. • Continue back and forth motion until strapping has reached desired tension. 3. Placing the seal • Seal should be placed open side down...
- Page 3 PC939 Safety Instructions This tool (or cutter) was designed and When cutting the strap, hold the manufactured for safe handling during upper portion and stand at a safe operation. For effective use of this distance away from the strap, as product, please read and follow all safety, the lower strap will snap forward. maintenance and operating instructions. Do not stand in line with the strap while it is being tensioned, the strap could break if over tensioned. Always wear, eye face and hand protection when operating this tool Do not put hands or other parts of Use the original packing products the body between the strap and the replacement parts. package. PC939 Parts List Part Order Part Order Description Qty. Description Qty. PC976 Base toggle PC960 Base PC977 Handle toggle...
Need help?
Do you have a question about the PC939 and is the answer not in the manual?
Questions and answers