Assembly-1: Notes on Assembling the Heat Sink (T)
Right View
(Boss)
(Claw)
Heat Sink (T)
Left View
(Boss)
(Claw)
(Boss)
FDR-AX100/AX100E/HDR-CX900/CX900E_L2
3. ASSEMBLY
Assembly-2: The Method of attachment of FP-2212 Flexible
Board
1 Fold dotted line parts of the FP-2212 Flexible
Board as shown in figure.
Mountain fold
Adhesive tape
Adhesive tape
Adhesive tape
Valley fold
2 Roll the FP-2212 Flexible Board 2 times
in the Hinge Assy as shown in figure.
Hinge Assy
2 Times
Flexible Board
3 Install the Hinge Cover (U) /Hinge Cover (O).
Hinge Cover (U)
Hinge Cover (O)
3-1E