Subscribe to Our Youtube Channel
Related Manuals for Psiber Data Systems PingerPro 70
Summary of Contents for Psiber Data Systems PingerPro 70
- Page 1 Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com USER GUIDE PingerPro Model 70/71/75/76 Psiber Data Systems Revision 2.01...
- Page 2 This guide is copyrighted by Psiber Data Systems Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Psiber Data Systems Inc. No patent liability is assumed, however, with respect to the use of the information contained herein. © Copyright 2014 by Psiber Data Systems Inc.
-
Page 3: Kit Content
The PingerPro is always available and always ready to: • Monitor network health • Manage network changes • Identify cable and network problems • Optimize network performance. Kit Content Psiber Data Systems Revision 2.01... -
Page 4: Specifications
Power Adaptor: 110/240 VAC Graphics Display: 320 x 240 RGB Interface: Color Touch Screen Power: Li-Ion Battery Pack Operating Temp: 32°F to 122°F / 0°C to 50°C Storage Temp: 14°F to 131°F / -10°C to 55°C Psiber Data Systems Revision 2.01... -
Page 5: Preparing The Unit
Using the wrong AC adapter could damage your tester. Psiber assumes no liability for damage in such cases. Never pull directly on the power cable to unplug it. Hold the power plug when removing the cable from the outlet. Psiber Data Systems Revision 2.01... -
Page 6: Getting Started
Setup allows the user to customize settings for the Auto Test and the Ping test to test specific network parameters. • The Help button displays step-by-step instructions on how to use the PingerPro and displays the quick start guide. Psiber Data Systems Revision 2.01... - Page 7 In this case, it will duplicate the Factory Default configurations. Select Set To Default to duplicate the parameters of the Factory Default configuration. Select Cancel to return to the Profile Screen without any changes. Profile Screen Dialog Profile Box Psiber Data Systems Revision 2.01...
- Page 8 Enter any profile name with up to 20 characters. Select OK for the name to be saved and to return to the Profile screen where the new name is displayed and highlighted. Profile Dialog Box Full Keyboard Profile Screen Psiber Data Systems Revision 2.01...
- Page 9 Fiber cable. Once Fiber is selected, the SFP details and capabilities are displayed. Select the SFP Module Detail button to show all the details of the connected SFP. Select OK to return to the Link Screen. Psiber Data Systems Revision 2.01...
- Page 10 Setup Link Timeout Screen Numerical Keyboard < arrow to return to the Main Setup Screen or select the IP Address button Select the Link button with the to continue to the IP Address Setup Screen. Psiber Data Systems Revision 2.01...
- Page 11 PingerPro once a link is established with the DHCP server. < Select the IP Address button with the arrow to return to the Main Setup Screen or select the MAC Address button to continue to the MAC Address Setup Screen. Psiber Data Systems Revision 2.01...
-
Page 12: Mac Address
The Serial Number of the unit is also displayed here. < Select the MAC Address button with the arrow to return to the Main Setup Screen or select the Ping button to continue to The Ping Setup Screen. Psiber Data Systems Revision 2.01... - Page 13 Interval button to display a numerical keyboard. After entering a valid number, select OK to return to the Ping screen. < Select the Ping button with the arrow to return to the Main Setup Screen or select the Ping List button to continue to The Ping List Setup Screen. Psiber Data Systems Revision 2.01...
- Page 14 IP Address. Enter in the desired IP address and select OK to set the IP Address. Do the same for Set End IPv4 address. Select the Save button to save the configuration. Setup Ping List-IP Range IP Range Setup Dialog Box Numerical Keyboard Psiber Data Systems Revision 2.01...
- Page 15 Setup PingIPv6 Screen Hexadecimal Keyboard < Select the Ping List button with the arrow to return to the Main Setup Screen or select the Trace Route button to continue to the Trace Route Setup Screen. Psiber Data Systems Revision 2.01...
-
Page 16: Trace Route
The hop count refers to the intermediate devices through which data must pass between the PingerPro and the target device. Each router along the path constitutes as a hop. Set the Max Hop limit by selecting the Max Hop button and entering in a number. Select OK. Psiber Data Systems Revision 2.01... - Page 17 The priority level values range from 0, best effort/lowest priority, to 7, the highest. These values can be used to prioritize different classes of traffic such as voice and video. Psiber Data Systems Revision 2.01...
- Page 18 Network Systems. Select the gray Timeout button to change the time the PingerPro waits for a LLDP, CDP or EDP packet. The Time Out button allows the user to set the time the device waits to detect LLDP/CDP/EDP information. Psiber Data Systems Revision 2.01...
- Page 19 PoE voltage and polarity of the device under test. < Select the VLAN/LLDP/PoE button with the arrow to return to the Main Setup Screen or select the Security button to continue to The Security Setup Screen. Psiber Data Systems Revision 2.01...
- Page 20 Setup Security Screen Setup Security Screen-Enabled Full Keyboard- Username < Select the Security button with the arrow to return to the Main Setup Screen or select the Settings button to continue to the Settings Setup Screen. Psiber Data Systems Revision 2.01...
- Page 21 PC until the export process is complete. Once the export process is complete and the PingerPro has been correctly ejected from the PC, press the ok button to end the export process and disconnect the USB cable. Psiber Data Systems Revision 2.01...
-
Page 22: Saved Data
Select Cancel to go back to the Saved Data screen without making any changes. < Select the Saved Data button with the arrow to return to the Main Setup Screen or select the Upgrade button to continue on to the Upgrade Setup Screen. Psiber Data Systems Revision 2.01... - Page 23 VERIFY, INSTALLING... of the new firmware. After a successful installation an UPGRADE COMPLETE dialog will appear, then about 5-10 seconds later it will reboot to the newly installed application. 12. Finally, Unplug the USB cord from the PingerPro. Psiber Data Systems Revision 2.01...
- Page 24 The top menu of the application displays the steps described to connect the PingerPro to the PingerPro Tools application. This same information can be found under the Upgrades and Exporting Data sections of this User Guide. Psiber Data Systems Revision 2.01...
- Page 25 PDF report or select the appropriate box to generate individual PDF reports. Alternatively, you can select the Add CSV Report file to generate a file that can be used with spreadsheet software such as Microsoft Excel. Psiber Data Systems Revision 2.01...
- Page 26 Upgrades section of this User Guide. Select the User Guide button on the PingerPro Tools and display the User Guide within the application. The PingerPro Tools application is available for download on the Psiber Data Systems Inc website at: http://psiber.com/online-resources.html...
-
Page 27: Auto Test
Depending on how the Auto Test is setup, the test can range from 5 to 120 seconds. Once the Auto Test is finished, green checkmarks will be displayed next to tests that have passed, and an "X" will indicate tests that have failed. Main Auto Test Screen in Progress Main Auto Test Screen Failed Psiber Data Systems Revision 2.01... - Page 28 Auto Test results. If no link is established within the timeout period, the button will turn red and a warning message is displayed. Below are a few examples of warning messages. DHCP Warning Message Link Warning Message Unsaved Warning Message Psiber Data Systems Revision 2.01...
- Page 29 & 76) < Select the Link button with the arrow to return to the Main Auto Test Screen or select the IPv4 Address or Security button to continue to the IPv4 Address or Security Results Screen. Psiber Data Systems Revision 2.01...
- Page 30 IPv4 Ping Screen IPv6 Ping Screen < Select the IPv4 Ping button with the arrow to return to the Main Auto Test Screen or select the LLDP/CDP/EDP button to continue to the LLDP/CDP/EDP Results Screen. Psiber Data Systems Revision 2.01...
- Page 31 Pairs 45-78 is called Midsapn. Power detected on all pairs is called Allspan. PoE Test Screen < Select the PoE Switch Info button with the arrow to return to the Main Auto Test Screen or select the Link button to continue to the Link Results Screen Psiber Data Systems Revision 2.01...
- Page 32 If the PingerPro provides proper identity, the authentication server responds with an “EAP Success” packet, which is then passed onto the PingerPro. The authenticator now allows access to the LAN network. Passed Security Screen Psiber Data Systems Revision 2.01...
- Page 33 Connection Details dialog box. The Ping Connection Details dialog box displays speed, duplex, partner capabilities, MAC address and IP address information. Select the OK button to return to the Main Ping Screen. Main Ping Screen Ping Detail Screen Psiber Data Systems Revision 2.01...
- Page 34 If the PingerPro cannot resolve the IP address, it displays stars. Use the up and down arrow to view all of the available information. Main Ping Screen Ping Target Details Screen Trace Route Screen Psiber Data Systems Revision 2.01...
- Page 35 Select the Settings button again to display the Settings Screen. Select the Show MAC button and then select OK to display the target's MAC address on the Main Ping Screen. Settings Screen Main Ping Screen w/MAC address Psiber Data Systems Revision 2.01...
- Page 36 Save As to rename the file. Selecting Cancel will cancel your Save and return back to the Main Ping Test Screen. Unsaved Warning Message Ping Test Save Screen Ping Test Save As Screen Psiber Data Systems Revision 2.01...
- Page 37 The PingerPro IP address will be displayed in gold to show its own information. Select the Pinger Pro IP address to bring up the Ping Target Details. Select OK when finished. Main Ping Screen test Completed Ping Target Detail Screen Psiber Data Systems Revision 2.01...
- Page 38 PingerPro has sent to the target device in real time. Onc ethe test has been terminated by the user, The Ping Target Details Dialog box will be displayed. Main Ping Screen Continuous Ping Dialog Box Ping Target Details Screen Psiber Data Systems Revision 2.01...
-
Page 39: Cable Test
Save button to save the test data. Select the Wiremap button with the arrow to return to the Main Cable Test Screen or select the Length button to continue to the Length Test screen. Psiber Data Systems Revision 2.01... - Page 40 Length Screen. Select the play button to run the test. < Select the Length button with the arrow to return to the Main Cable Test Screen or select the Tone button to continue to the Tone generator. Psiber Data Systems Revision 2.01...
- Page 41 The options are SLOW, MEDIUM, FAST, or VERY FAST. Port ID Screen < Select the Tone button with the arrow to return to the Main Cable Test Screen or select the Wiremap Button to return to the Wiremap Test Screen. Psiber Data Systems Revision 2.01...
- Page 42 75/76 and the fiber button was selected in Setup under the Link Screen. The Fiber Test continuously measures and displays the Received (RX) and Transmitted (TX) power detected from the SFP module. The sample count and the minimum, average and maximum power detected are displayed. Home Screen Main Fiber Test Screen Psiber Data Systems Revision 2.01...
-
Page 43: Disk Maintenance
Begin the test by pressing the Start button found in the Disk Maintenance Screen. The screen will display the status of the test in real time. When the test is complete, press the Home button to return to the Home Screen. Psiber Data Systems Revision 2.01... - Page 44 Getting Started Help Screen < Select the arrow to return to the Main Help Screen or the up and down arrows to see more help information. Psiber Data Systems Revision 2.01 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431...
Need help?
Do you have a question about the PingerPro 70 and is the answer not in the manual?
Questions and answers