Device Settings - Videon Shavano Product Manual

2.6 Device Settings

This tab is used to modify the device name, role, password management and network settings
for any Videon device on the network. Clicking the "Save" button will change the configuration of
the device.
Select a device: This dropdown lists all Videon devices on the network. Select the device for
which you want to adjust settings.
General Settings
Name: Enter the name that you want to use to identify the device on the network. We
recommend choosing a name that indicates the physical location of the device or the
video source or display that is connected to the device. By default, Videon devices are
assigned the unit's serial number as a name.
Security
Password Management
•
Setting Password: Turn Authentication on. Enter the password in the Password
field and the Confirm Password field. Press Save.
•
Username: The default username is "admin".
•
Changing Password: Enter your old password in the Admin Password field and
enter your new password in the New Password and Confirm New Password
field.
•
Turning Authentication Off: Turn the Authentication switch off. Enter your
password in the Admin Password field.
Note: If you forget your password, authentication can be turned off by doing a factory
reset on the board. Refer to Section 3: Hardware Reset Instructions for instructions on
how to do a factory reset.
Network Settings
Address Assignment: Use this setting to change the device between DHCP and Static
IP address modes.
IP Address: This displays the current IP address configured for the device. If Static IP
was selected in the Address Assignment option above, you can edit the IP address.
Subnet Mask: This displays the current subnet mask configured for the device. If Static
IP was selected in the Address Assignment option above, this can be edited.
Gateway: This displays the current gateway configured for the device. If Static IP was
selected in the Address Assignment option above, this can be edited.
DNS Address: This displays the current DNS server address configured for the device.
If Static IP was selected in the Address Assignment option above, this can be edited.
2. Controlling your Videon Device(s) Page 16