Download Print this page

iBeam TE-4PSKRUB Product Manual

Advertisement

Quick Links

III. Learning Function
If the vehicle has a spare tire or hitch on the back, the
ordinary parking assist system may detect the tire or hitch
which would result in a continuous false alarm. The learning
function on this device can easily remove false alarms and
it will remember the tire or hitch as part of the vehicle,
correcting the alarm. Learning Function Activation: Make
sure there are no objects within 8 feet from the rear of the
vehicle. When the ACC is switched to the ON position, shift
the vehicle from PARK to REVERSE and back continuously
5 times within 10 seconds, after doing this the LED light
on the display will flash three times. The flashing LED will
confirm that the learning function is activated and the
system will remember the tire/hitch/bike holder's, location
automatically. NOTE: When the hitch or tire has been
removed, you will have to relearn the parking assist system
so it knows that obstruction has been removed.
Installation
800.221.0932 • iBeamUSA.com
460 Walker Street, Holly Hill, FL 32117
III. Learning Function
If the vehicle has a spare tire or hitch on the back, the
ordinary parking assist system may detect the tire or hitch
which would result in a continuous false alarm. The learning
function on this device can easily remove false alarms and
it will remember the tire or hitch as part of the vehicle,
correcting the alarm. Learning Function Activation: Make
sure there are no objects within 8 feet from the rear of the
vehicle. When the ACC is switched to the ON position, shift
the vehicle from PARK to REVERSE and back continuously
5 times within 10 seconds, after doing this the LED light
on the display will flash three times. The flashing LED will
confirm that the learning function is activated and the
system will remember the tire/hitch/bike holder's, location
automatically. NOTE: When the hitch or tire has been
removed, you will have to relearn the parking assist system
so it knows that obstruction has been removed.
Installation
800.221.0932 • iBeamUSA.com
460 Walker Street, Holly Hill, FL 32117
TE-4PSKRUB
Product Manual
The iBEAM TE-4PSKRUB parking sensor kit consists
of ultrasonic rubber sensors, a control box and an
LED display. The system detects the distance between
the vehicle and any obstructions with the use of the
ultrasonic rubber sensors mounted in the bumper. The
distance of the obstruction will be displayed in feet on
the LED display and an audible warning will be heard.
The TE-4PSKRUB can be upgraded to an 8 sensor
parking assist kit with the help of the TE-RES rubber
replacement parking sensors (purchased separately),
4 sensors for the front and 4 sensors for the rear.
TE-4PSKRUB
Product Manual
The iBEAM TE-4PSKRUB parking sensor kit consists
of ultrasonic rubber sensors, a control box and an
LED display. The system detects the distance between
the vehicle and any obstructions with the use of the
ultrasonic rubber sensors mounted in the bumper. The
distance of the obstruction will be displayed in feet on
the LED display and an audible warning will be heard.
The TE-4PSKRUB can be upgraded to an 8 sensor
parking assist kit with the help of the TE-RES rubber
replacement parking sensors (purchased separately),
4 sensors for the front and 4 sensors for the rear.

Advertisement

loading

Summary of Contents for iBeam TE-4PSKRUB

  • Page 1 LED display and an audible warning will be heard. The TE-4PSKRUB can be upgraded to an 8 sensor parking assist kit with the help of the TE-RES rubber replacement parking sensors (purchased separately), 800.221.0932 •...
  • Page 2 I. Specifications should be plugged into the control box. (Example A: left, B: mid-left, C: mid-right, D: right) Rated Voltage: 12V (9-16V) 4) Connect the RED wire to the +12 volt accessory wire. Rated Current: 20mA~200mA 5) Connect the BLUE wire to the +12 volt reverse light wire. Detecting Distance: Rear (0’...