Table of Contents
Advertisement
5
[Outermost circumference inspection]
[Outline]
I The outermost circumference of the touch panel is traced, and the outermost circumference value for X and Y and
the reference value for A/D correction are obtained.
When exiting the menu by pressing WIDE key, the obtained value and the adjustment information (OK/NG) are saved
in the EEPROM.
When saving the data, checking is made whether the obtained value is within the range of the "table of allowable
range for setting value" as shown below or not.
• When the obtained value is within the range;
The obtained value shown below and the adjustment information are written into the EEPROM,
and OK is displayed on the screen.
Outermost circumference value for X and Y (min/max) : 4 bytes
Reference value for A/D correction of X and Y
Adjustment information (adjustment OK)
• When the obtained value is outside of the range;
The adjustment information described below will be written into the EEPROM, and NG is displayed on the screen.
Adjustment information (adjustment NG)
[Display specifications]
I Outermost circumference inspection in process
G "MIN"/"MAX" value of the outermost circumference of X axis and Y axis and reference value for
A/D correction are displayed.
G "before" (red frame) indicates the outermost circumference value stored in the EEPROM.
"after" (blue frame) indicates the MIN/MAX value of the outermost circumference value (A/D value) currently
captured and the reference value for A/D correction.
5
6
: 2 bytes
: 1 byte
: Total 7 bytes
: 1 byte
AVH-P7900DVD/RE
6
7
7
8
A
B
C
D
E
F
103
8
Advertisement
Table of Contents
