Features & Benefits ....3 FCC Information ....9 Setup ........4 Customer Support ....10 Placement Guidelines ..... 5 Warranty......10 Using the Room Monitor ..6 Questions? Contact Customer Support at (877) 221-1252 or visit www.AcuRite.com. SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product.
Features & Benefits FRONT 1. Wireless Signal Indicator Flashes when data is being wirelessly transmitted. 2. Low Battery Indicator 3. Current Indoor Humidity Displayed when no wired sensor is attached (see page 6). 4. Current Indoor Temperature Displayed when no wired sensor is attached (see page 6).
Install or Replace Batteries Write Down the Monitor’s ID Batteries MUST be installed for After batteries are installed, this product to operate. AcuRite a unique 6-digit alphanumeric recommends high quality alkaline ID appears on the display batteries for the best product momentarily.
Placement for Maximum Accuracy AcuRite products are sensitive to surrounding environmental conditions. Proper placement of the Room Monitor is critical to the accuracy and performance of the product. Room Monitor Placement The Monitor is designed for indoor use. Place the Monitor in a dry area free of dirt and dust.
OPERATION Using the Room Monitor The Room Monitor features built-in temperature and humidity sensors, to view current conditions in the location where the Monitor is placed. Expand the System The Room Monitor can be expanded to track additional conditions using compatible wired sensors (optional;...
Monitor and wired sensor. Verify that the conditions ERROR 2 being monitored are within the measurement range for the wired sensor. If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance. Care & Maintenance Clean with a soft, damp cloth.
FCC Information This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: 1- This device may NOT cause harmful interference, and 2- This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 info@chaney-inst.com AcuRite 24/7 support at www.