QSee Q-Go Manual

Manual
Controls and Features
Speaker
Microphone
LED Monitor
Menu
Up
Down
Mode
A/V Output
HDMI Output
Introduction
Thank you for your purchase of Q-See's Q-Go HD vehicle
camera. Please enjoy the confidence and security provided
by this automated impartial witness as well as the pleasure
HD
offered by being able to safely record a trip along your favorite
stretch of highway in full 1080p high definition.
This camera offers a number of features which allow it to
best meet your needs. Please read this entire manual before
operating your camera and retain it for later reference.

Technical Specifications

Setup
Charge Battery
To set up your Q-Go HD, use the included car charger. Or,
Attachment
Point for Bracket
use the included USB cable to connect to a powered USB
port on a computer or 5V USB charger (not included). The
camera will power on as soon as it has power and will begin
Lens
charging its internal battery. The battery will hold a 10-15 min-
IR LEDs (4)
ute charge, so it is important to keep the camera plugged in.
Power/ Install microSD Card
Recording
The Q-Go HD supports microSD cards up to 32GB in size.
Indicator
Use a Class 10 card for best results.
Red=Off, Charging
Pink= On, Charging
Pink/Blue = On,
Recording
On/Off
microSD
Memory Card
Slot
Power On/Off
The Q-Go HD will turn on and begin recording as soon as it
Record/OK
is connected to power, such as when it is connected to the
car charger and the ignition is turned on. It can be turned on
by pressing and holding the Power button for 1 second. The
USB
Power/Recording Indicator LED will glow a steady pink. An
alternating red/pink indicator shows that the camera is record-
Reset
ing video. To turn off the camera, press and hold the Power
button for 3 seconds.
3
Screen: 2.7" 4:3 TFC LCD
Lens: 140° super wide
Languages: English, French, German, Italian, Japanese,
Portuguese, Russian, Spanish, Chinese
(Simplified/Traditional)
Video Size: 1080p/720p/480p
Video Format: AVI
Photo Resolution: VGA, 3MP, 5MP, 8MP, 12MP
Photo Format: JPG
Shooting Modes: Single, Self Timer (2, 5, 10 sec), Continuous
TV Output: NTSC/PAL
USB Port: USB 2.0
Power Supply: 5V 500mA
Battery: Built-in (063525PL)
Supported OS: Windows 2000/XP/Vista/7,8,10
Macintosh 10.3.6 or above
Low Power
• Insert the card as shown. Do not force
the card or insert it improperly or you
may damage your camera.
• When the card is inserted, the camera
will overwrite any existing data.
• Press gently on the card to cause it to
pop out for removal.
Fully Charged
2
4