Skyndi ACTIVears User Manual

Handsfree

Specifications

™
ACTIVears allows you to control your Bluetooth
Bluetooth Version: CSR8635, v4.0+EDR
device while listening to music. Please refer to the
Bluetooth Profiles: Headset, Handsfree, A2DP, AVRCP
chart below for the appropriate functions.
Operating Distance: 32.8 feet
Talk Time: 4 - 6 Hours
Standby Time: 150 Hours
Press and release " + " button
Charging Time: 1.5 Hours
Charing Port: MicroUSB
Press and release " - " button
Press and hold the " + " button

Charging

ACTIVears™ comes with a built-in rechargeable battery and
Press and hold the " - " button
MicroUSB charging cable. Prior to use, we recommend fully charging
the unit, which may take up to 1.5 hours.
Press and release MFB once
Press and release MFB once Charging Indicators:
Red Light: Charging
No Light: Fully Charged

Product Overview

™
ACTIVears
Wireless Headphones
Power On & Off
Power On: Press and hold MFB for 4 seconds
Power Off: Press and hold MFB for 4 seconds

Connecting

1. Keep your device within 3 feet from ACTIVears™. ACTIVears
from the device's interface. Refer to the chart below for
2. Navigate to your device's Bluetooth configuration menu and enter
the appropriate functions.
pairing mode.
3. Press and hold the multi function button for approximately 8
seconds until the LED light on ACTIVears™ flashes red and blue.
4. Using your bluetooth device, scan for a list of available devices
and select "SKYNDI".
5. If prompted, enter password or PIN code: "0000".
(MFB)
6. After successfully pairing, a blue LED light on ACTIVears™
will flash twice in 4-second intervals.

Multi-Pairing

ACTIVears™ can simultaneously be connected with up to two
Bluetooth devices. Here's how:
1. Pair ACTIVears™ with device A following the aforementioned
procedures.
2. After successfully pairing device A, reenter pairing mode on
ACTIVears™, pairing with device B.
3. ACTIVears™ is now connected to two devices simultaneously.
Handsfree
™
allows you to answer and end calls directly
Press and release MFB once
Press and release MFB once
Press and hold MFB for about
2 seconds or until you hear a
tone
Press and release MFB once
Press and release MFB twice
Press and hold MFB for about 2
seconds
Press and hold MFB for about 2
seconds
Press and release MFB twice
Press and release MFB twice