Table of Contents
Advertisement
Configuration
3
3.1
Setting the operating mode
The rotary HEX switch, SW1, mounted on the front edge of the module sets the audio
group to be extracted as detailed in the table below. The asynchronous mode should
be used in situations where the embedded AES3 audio maybe unlocked.
Hex switch settings
Mode
0
1
2
3
4
5
6
7
Note: Each audio group selected can provide 2 stereo pairs or 4 mono signals. It is
not possible to select a stereo pair from one group and another stereo pair from a
different group. At any one time all audio outputs will originate from the same group
as selected by SW1.
8
Group
Sync/Async
1
Sync
2
Sync
3
Sync
4
Sync
1
Async
2
Async
3
Async
4
Async
chapter 3
4429
Issue 1
Advertisement
Table of Contents
