1. Manuals
  2. Brands
  3. initium Manuals
  4. Adapter
  5. Promi SD101
  6. User manual

initium Promi SD101 User Manual

Promi sd
Hide thumbs
Table of Contents

Advertisement

Quick Links

Promi SD™
User Manual
Version 1.7
Enabling Wireless Serial Communications
Promi SD™ User Manual ver 1.7
www.initium.co.kr
by Bluetooth
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Promi SD101 and is the answer not in the manual?

Questions and answers

Summary of Contents for initium Promi SD101

  • Page 1 Promi SD™ User Manual Version 1.7 by Bluetooth Enabling Wireless Serial Communications Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 2 Version Changed Contents Date Draft version 01/02/2003 Added Technical Specifications/Troubleshooting. 06/14/2003 Amended Power Consumption data of Promi SD101/102/202 06/24/2003 Amended PromiWIN software interface 07/14/2003 Added feature of Promi SD version v3b 09/08/2003 Revised by modifying some errors in technical specifications...

  • Page 3: Table Of Contents

    2.2.6 AT command vs. Operational Status 3. Technical Specifications ........27 Default Serial Settings..................... 27 Power Consumption....................27 Environmental ......................28 Serial Interface ......................28 Maximum distance between Promi SD™s ............29 4. Troubleshooting ..........30 Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 4 How to get Bluetooth CF cards connected to Promi SD ........33 Optional Antennas .........35 For Multi-Serial Connections ......37 Promi-MSP™......................37 7. Legal Notice ............38 9. About this Manual ..........40 Appendix A: Power Adaptor Specification ..41 Appendix B: AT command sets ......44 Promi SD™ User Manual ver 1.7 www.initium.co.kr...

  • Page 5: Product Description

    RS485. Product line Model Name Part No. Spec. Promi SD101 PSD00-10100 Class 2 / Output Power: 2.5mW (4dBm) 5V DC power supply Rechargeable Li-poly Battery, internal w/ Power Adapter w/ Setup Software & manual on CD...
  • Page 6 Fig. 1.1.1 A CD-ROM inclusive a setup software (Promi-WIN™) and user manual Fig. 1.1.2 Optional Power Adaptor Part no. PSD00-00010 Fig. 1.1.3 USB Power Adaptor Part no. PSD00-00020 *You may use USB port to supply power to Promi SD™ using this USB power cable Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 7 Fig. 1.1.4 DC Power Cable Part no. PSD00-00030 *Red colored line of DC power cable is for ‘+’ Promi SD™ User Manual ver 1.7 www.initium.co.kr...

  • Page 8: External View

    ON/OFF SWITCH HARD RESET SWITCH Figure 1.2.2 Promi SD right side view DC Connector Figure 1.2.3 Promi SD left side view Please refer to the section for Promi SD™ power options 1.5 Power Supply Promi SD™ User Manual ver 1.7 www.initium.co.kr...

  • Page 9: Led Indicator

    Green flashing STATUS LED every 3 seconds indicates Promi SD™ INQUIRY SCAN or PAGE SCAN operation Amber POWER LED of Promi SD101 indicates battery is being charged. Green POWER LED of Promi SD101 indicates battery is fully charged. Green POWER LED of Promi SD202 indicates power is being supplied.

  • Page 10: Power Supply

    Power via USB power cable (p/n: PSD00-00020) Power via DC power cable (p/n: PSD00-00030) Power via pin 9 of D-SUB connector. Promi SD101 can be recharged by 4 ways above. Figure 1.5.1. DC plug polarity Promi SD101 (Class2): 5V+/-10%, 500mA minimum...

  • Page 11: Interface- Rs232 / Bluetooth

    The serial interface is RS232 DCE configured; a DTE device can be connected. Baud rate: 1200~115200 bps 230400bps (for Promi SD102/202/ESD) Hardware flow control (RTS/CTS) Signal Direction Output Output Input Input Output Input Output Input Table 1.7.1. Promi SD™ 9-PIN Specification Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 12 Bluetooth connection ATS13=1<cr>: Users may receive CDC signal from other Promi SD. (This function will be available from future version of Promi SD for DCE devices) ATS13?: To see current status of ATS13. Promi SD™ User Manual ver 1.7 www.initium.co.kr...

  • Page 13: Bluetooth Interface

    1.6.2 Bluetooth Interface Bluetooth Specification V 1.1 Level 4 dBm (Promi SD101) 18 dBm (Promi SD202) Range ~30m (Promi SD101) ~100m (Promi SD202) Bluetooth protocols RFCOMM, L2CAP, SDP Supported Profiles General Access Profile Serial Port Profile Promi SD™ User Manual ver 1.7...

  • Page 14: Configuration

    Bluetooth devices, activate INQUIRY SCAN and PAGE SCAN. Before making the first Bluetooth connection with SD units, be prepared with a pair of SD units and also install the PromiWIN program on the CD enclosed in the Promi product package. Promi SD™ User Manual ver 1.7 www.initium.co.kr...

  • Page 15: Let's Make Sd01 To Be Discoverable/Connectable

    Fig. 1.1 SD01 above. 1-4. Users need to select exactly same Baud/Parity/StopBit as real settings of attached SD01. 9600/No/OneStopBit are default initial settings of all of Promi SDs. 1-5. Press OK button when finished. Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 16 Click the ‘Device Setting’ icon in the list control box. Users may change the Baud rate/Parity/StopBit to meet their individual needs. <Fig. 1.3> 1-8. Click the ‘Connection(in)’ icon in list control box. Check both options and then click the START button as shown in Fig. 1.5. Promi SD™ User Manual ver 1.7 www.initium.co.kr...

  • Page 17: Let's Make Sd02 To Search Sd01 And Connect To

    2-3. Users need to select exactly same Baud/Parity/StopBit as the setting of attached SD02. 9600/No/OneStopBit is default setting of all of Promi SDs. 2-4. Press OK button. 2-5. Select the ‘Connection(out)’ icon in the list control box and click the SEARCH button. Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 18 Green, which means they are Now, Status LEDs on Both SD01 SD02 connected. 2-10. Do not detach from your computer yet, we will go to next stage for Auto- SD02 connection (Always-connection). Promi SD™ User Manual ver 1.7 www.initium.co.kr...

  • Page 19: Let's Make Auto-Connection Between Sd01 And Sd02

    Now, Status LEDs of becomes ‘Orange’, as well as SD01, as they are SD02 disconnected. 3-3. Select Device Setting icon in the list control box, and select MODE1 in Operation Mode and apply. Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 20 Then, turn on again Both almost at the same time. SD01 SD02 Now, you will see Green Status LEDs on both units. will be connected automatically, whenever, if configuration is not SD01 SD02 changed. Promi SD™ User Manual ver 1.7 www.initium.co.kr...

  • Page 21: Using A Terminal Program

    1. First check the status of the SD by entering ‘AT+BTINFO?’. The SD response is comprised of BD_ADDR, Device Name, Operating Mode, Operating Status, Authentication and Encryption flags. To make connection to other Bluetooth devices, the operating status of the first SD should be Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 22 Bluetooth device for connection. During the connection process, the STATUS LED will flash green every second. 4. Connection is indicated by the SD returning a ‘CONNECT’ message and displaying a green STATUS LED. ATD000B53000080 CONNECT Promi SD™ User Manual ver 1.7 www.initium.co.kr...

  • Page 23: Making Promi Sd™ Do Inquiry Scan And

    3. Try Bluetooth connection to the SD from the other Bluetooth device. Once connected the first SD will return the ‘CONNECT’ message and the STATUS LED will display a continuous green without flashing. AT+BTSCAN CONNECT Promi SD™ User Manual ver 1.7 www.initium.co.kr...

  • Page 24: Releasing The Existing Bluetooth Connection

    Check the current SD status by entering the ‘AT+BTINFO?’ command. The SD status should display CONNECT STATUS. AT+BTINFO? 000B530000A9,PSDv2g-0000A9,MODE0,CONNECT,0,0 2. Release the current Bluetooth connection by entering ‘ATH’ command. Once disconnected successfully, the SD returns the ‘DISCONNECT’ message. DISCONNECT Promi SD™ User Manual ver 1.7 www.initium.co.kr...

  • Page 25: Automatic Connection Of Two Promi Sd™ Units

    4. Set the operating mode of one SD to MODE 1 by entering an ‘AT+ BTMODE’ command as shown below. AT+BTMODE,1 5. Set the operating mode of the other SD to MODE 2 by entering an ‘AT+BTMODE’ command as show below. AT+BTCANCEL AT+BTMODE,2 Promi SD™ User Manual ver 1.7 www.initium.co.kr...

  • Page 26: At Command Vs. Operational Status

    √ √ ATZ<cr> √ AT+BTINQ?<cr> √ ATD112233445566<cr> √ ATD<cr> √ AT+BTSCAN,n<cr> √ AT+BTSCAN,112233445566<cr> √ AT+BTCANCEL<cr> √ √ ATO<cr> √ ATH<cr> √ AT+BTAUTH,Auth,Encr<cr> 3) 4) √ AT+BTMODE,n<cr> √ AT+BTNAME=”Name”<cr> √ AT+BTKEY=”nnnn”<cr> ATS10=0 or ATS10=1 Promi SD™ User Manual ver 1.7 www.initium.co.kr...

  • Page 27: Technical Specifications

    9600 Baud, 8 data bits, no parity, 1 stop bit, hardware flow control 3.2 Power Consumption Condition Current Consumption Battery Life 180mA Li-Poly Battery (Promi SD101) (Promi SD101) (Promi SD202) If NOT connected to Host 3.5 mA 19 mA 49 hrs 30 min.

  • Page 28: Environmental

    34 mA 12 hrs 40 min Non-Park mode 17.8 mA 40 mA 10 hrs 3.3 Environmental Model No.: Promi SD101 Recommended operating conditions:-10’C~70’C Humidity: 90% Non-condensing Model No.: Promi SD202 Recommended operating conditions: -20’C~70’C Humidity: 90% Non-condensing 3.4 Serial Interface Model No.: Promi SD101...

  • Page 29: Maximum Distance Between Promi Sd™S

    Optional Antennas. Users may extend wireless link distance up to 1.2Km via Promi SD202 with Patch Antennas for both sides. Model no. Antennas for two Promi SD units Max. Distance Promi SD101 Default Antenna - Default Antenna 30 meters Default Antenna - Dipole Antenna 50 meters...

  • Page 30: Troubleshooting

    Troubleshooting 4.1 ON/OFF of Hardware Flow control Promi SD101 of version v2g & v2h are designed to use CTS/RTS for handshaking. For equipment which is not using Hardware flow control for serial communications, Promi SD101’s firmware should be set to turn OFF hardware flow control (CTS/RTS).

  • Page 31: Enabling/Disabling Of Response Signals

    To avoid these possible errors, users may disable the response signals via PromiWIN™ or AT commands at Terminal. 1) By Promi-WIN™, check OFF at Signal pane at Device Setting panel to disable 4 response signals from Promi SD™. Promi SD™ User Manual ver 1.7 www.initium.co.kr...

  • Page 32: For Dce Connection

    Tx/Rx, CTS/RTS, DTR/DSR for right operation. For more information, please contact support@initium.co.kr 4.4 Hardware Reset For Hardware reset, press the button on the right side of the Promi SD™ unit with a narrow tool such as a ball-point pen.

  • Page 33: How To Get Bluetooth Cf Cards Connected To Promi Sd

    PromiWIN™ software of latest version, which will be more familiar to consumers. PromiWIN™ can be downloaded from our website at: http://www.initium.co.kr/english/download.html 1) In PromiWIN version3, start and go to the Device Setting menu. 2) Select MODE3 to allow any Bluetooth device can discover and connect to this Promi SD.
  • Page 34 Get your Bluetooth CF cards or USB adaptors connected to this Promi SD™ Then you finish to connect your Bluetooth devices to Promi SD. Open you now. COM port of Serial Communication program to verify communication status. Promi SD™ User Manual ver 1.7 www.initium.co.kr...

  • Page 35: Optional Antennas

    (2) Patch Antenna (w/ RF extension cable & wall-attachable nails) Part No.: PSD00-00060 8.5dBi Including a 30cm RF extension cable Longer RF extension cable Part No.: PSD00-00061: 1m length For 3m and longer length, please ask it to our support@initium.co.kr SMA connector Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 36 Patch antenna to the wall. *Distance Data between Promi SD™s when Optional Antennas are used: Model no. Antennas for two Promi SD units Max. Distance Promi SD101 Default Antenna - Default Antenna 30 meters Default Antenna - Dipole Antenna 50 meters...

  • Page 37: For Multi-Serial Connections

    For multiple serial connections, we recommend Promi-MSP™. Promi-MSP™ has 7 default Bluetooth connections and can be expanded to up to 14 connections. More information on Promi-MSP™ can be found in its User Manual at www.initium.co.kr <Fig. 7.1.1 Promi-MSP™> Promi SD™ User Manual ver 1.7...

  • Page 38: Legal Notice

    SD™ within your networking environment. Should you require more information, please refer to Initium website at http://www.initium.co.kr. Trademark Acknowledgements The Bluetooth trademarks are owned by their proprietor and used by Initium Co., Ltd. under license. Promi™ is a registered trademark of INITIUM. Copyright Information The unauthorized copying of materials that are covered by copyright and other international proprietary or intellectual property rights is prohibited in most countries.
  • Page 39 PAID BY PURCHASER TO INITIUM FOR THE PRODUCT WITH RESPECT TO WHICH LOSSES OR DAMAGES ARE CLAIMED. IN NO EVENT SHALL INITIUM OR ITS LICENSOR AND SUPPLIERS BE LIABLE FOR ANY INDIRECT, INCIDENTAL OR CONSEQUENTIAL LOSSES OR DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING, BUT NOT LIMITED TO, LOSS OF...

  • Page 40: About This Manual

    This manual is available in a printable PDF version on-line and on the CD enclosed in the Promi SD product package. For additional support related to Promi SD and this document, contact INITIUM via: INITIUM Co., Ltd. #716, Kumgang-Hitech Valley, 133 Sangdaewon, Jungwon, Sungnam, Kyunggi, 462-120, Korea Tel.: +82-31-777-5703...

  • Page 41: Appendix A: Power Adaptor Specification

    2.1.2.1. Nominal input frequency : 50 / 60 Hz 2.1.2.2. Rated input frequency : 47 - 63 Hz 2.1.3. AC INPUT CURRENT : MAX 0.3 A (RMS) at 90 Vac 2.2 OUTPUT CHARACTERISTICS 2.2.1. DC OUTPUT Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 42 2.3.4. STORAGE HUMIDITY : 90 % RELATIVE 2.3.5. BURN-IN PROCESS 2.3.5.1. All unit shall be subjected to burn-in process of mass production. 2.3.5.2. TEMPERATURE : 30 +/-5'C 2.3.5.3. LOAD CONDITION : 2 A Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 43 2.3.5.4. INPUT VOLTAGE : 110 / 220 Vac 3. MECHANICAL CHARACTERISTICS 3.1. DIMENSIONAL SIZE LENGTH : 66 mm WIDTH : 48.5 mm HIGHT : 35 mm 3.2. OUTPUT CABLE CABLE LENGTH : 1850 +/- 50 Promi SD™ User Manual ver 1.7 www.initium.co.kr...

  • Page 44: Appendix B: At Command Sets

    … <cr><lf>BD_ADDR, Device Name , Class of Device<cr><lf> <cr><lf>OK<cr><lf> Description : This command is used to inquiry other Bluetooth devices nearby. The INQUIRY process is carried out during the predefined time duration (30 Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 45 AT command. Your SD does INQUIRY SCAN and PAGE SCAN until it has a connection from other Bluetooth device. Once connected, your SD returns ‘CONNECT’ message. You can use ‘AT+BTCANCEL’ to cancel this operation. This AT command has the same effect of ‘AT+BTSCAN,3,0’. Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 46 Cancel currently ongoing operation of your SD. Function : <cr><lf>OK <cr><lf> Response : This AT command works only when your SD is busy in doing ‘AT+BTSCAN’, Description : ‘ATD’ or ‘AT+BTINQ?’. Once canceled successfully, your SD will become Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 47 AT commands or do soft- reset. To enable authentication or encryption, set authentication or encryption parameter as 1. Otherwise set either of them as 0. Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 48 Description : Two Bluetooth devices which are to be connected should have the same passkey. The default passkey of your SD is ‘1234’. You can assign maximum 16 alphanumeric characters as a passkey. Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 49 This AT command just deletes the info of paired devices stored on SD’s Flash Description : memory. To delete the same info resides on SD’s RAM, you have to do software reset or hardware reset. Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 50 Parity = N (No parity), E (Even parity) or O (Odd parity). Stopbit = 1 or 2. Handshaking = 1 or 0 (If ‘1’, hardware handshaking will be used. If ‘0’, handshaking function of Promi SD will be turned off) Full AT commands set Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 51 <cr><lf>OK<cr><lf> Enable inquiry or Page scans. If n=1, disable page and enable inquiry. If n=2, enable page and disable inquiry. If n=3, enable both page and inquiry. Scan will be performed during <to> Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 52 Up to 16 characters. AT+BTINFO?<cr> <cr><lf>112233445 Retrieve local device information including BD address, Friendly name, 566,FriendlyName, mode of device, internal operation Mode,State,Authent state and status of authentication ication,Encryption< cr><lf> and encryption features. <cr><lf>OK<cr><lf> Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 53 <cr><lf>OK<cr><lf> ‘nn’ should be ASCII code (Decimal), printable character. Default escape charater is ‘+++’ AT+PINQ?<cr> For Periodic Inquiry. Promi SD will try <cr><lf>OK<cr><lf> to inquire nearby Bluetooth devices periodically and deliver the inquired Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 54 If set to ‘1’, when disconnected, data stored in Promi SD will be removed. ATS13 Enable CDC accept (default 0) If set to ‘0’, Promi SD will use CDC signal to let Host know Bluetooth connection status. Promi SD™ User Manual ver 1.7 www.initium.co.kr...
  • Page 55 Error Code for last occurred error. Users can not change this value ATS31 Page Timeout (default 300) Unit: second. ATS33 Inquiry Timeout (default 30) Unit: second. ATS46 BD address of last connected device Promi SD™ User Manual ver 1.7 www.initium.co.kr...

This manual is also suitable for:

Promi sd102Promi sd202

Table of Contents