Sony Xperia UL Basic Manual

Preface
Thank you for buying "Xperia
"product" from here on).
Before using the product, read "Basic Manual" (this manual)
and "取扱説明書詳細版 (Full Instruction Manual)" (Japanese)
to ensure safe use and handling.
About Operating Instructions
■ Basic Manual (this manual)
Handles only basic operations for main features.
For detailed descriptions on various functions, refer to the
"Instruction Manual" (Japanese) application installed on the
product or "取扱説明書詳細版 (Full Instruction Manual)
Basic Manual
(Japanese)" available on the au homepage.
http://www.au.kddi.com/support/mobile/guide/manual/
･ Company names and product names referred to in this
manual are trademarks or registered trademarks of
respective companies. The TM, ® marks may be omitted in
this manual.
■ "Instruction Manual" (Japanese) application
This product allows you to use the "Instruction Manual"
(Japanese) application on the product to confirm detailed
operational procedures.
Certain functions can be directly activated from the
application screens on which their operations are described.
From the Home screen, [
(Japanese)
･ When you activate for the first time, follow the onscreen
instructions to download and install application.
Do you have everything? Getting Ready
Before your start using the product, make sure that you have
Names and functions of parts
all the following packaged with the product.
a Headset connection
･ Xperia TM ･ Desktop Holder (SOL22PUA) *1
UL
*1
(with battery cover) terminal
b Whip antenna: Used to
watch 1Seg programs.
c Front camera
d Proximity sensor:
Switches touch panel on
and off to prevent from
erroneous operation
･ 取扱説明書 (Instruction Manual) (Japanese)
during a call.
･ Xperia TM ULのご利用にあたっての注意事項
e Earpiece
TM
(Cautions on using Xperia UL) (Japanese)
f Light sensor: Auto-control
･ Battery pack
･ 携帯電話機の比吸収率などについて
(SOL22UAA)
for display brightness
(Radio Frequency (RF) exposure and
g Infrared data port
Specific Absorption Rate (SAR)) (Japanese)
h Display (Touch panel)
･ 設定ガイド (Setting Guide) (Japanese)
i Notification LED: Notifies
The following items are not included in
charging status, missed
the package.
calls, mail reception.
･ microSD memory card
*1 Including warranty j Power key/Screen lock key:P
･ AC adapter
k Volume key/Zoom key: m
･ Earphones
･ microUSB cable l Camera key: k (Activates the camera, works as a
❖Information
shutter when shooting)
･ Purchase a specified charger (sold separately).
*1
m GPS Antenna
･ Illustrations used in this manual are just images for
n Camera
explanations. They may be different from actual ones.
g
■ Attaching microSD memory card Charging
1 Confirm the orientation of the microSD memory card
When you purchase your product, the battery pack is not fully
and insert it in the direction of the arrow
charged. Make sure to charge the battery pack before use.
Insert the SD memory card with contact side down.
❖Information
･ When the charging starts, notification LED turns in red/orange/
green according to the battery level. Green LED indicates that
the battery charge reaches 90 percent or more. To check the
battery level, see the status bar in the top of the Home screen.
microSD memory card
Alternatively, from the Home screen, [
phone] [Status] and see "Battery level". When the battery
charge reaches 100 percent, "100%" is shown on the status bar,
"Battery level" and the unlock screen.
･ When the battery level becomes 14 percent or less, a pop-
up window "Connect charger" appears. Tap "Battery info" to
check battery usage.
･ When you start charging the battery with the product
2
Attach the battery pack and the battery cover, and
powered off, the power turns on even though operation is
press each tab to close firmly not available. Do not charge the battery in a place where the
use is prohibited such as in airplane or hospital.
❖Information
･ It may take longer to complete for charging with a PC or
･ Insert a microSD memory card in the appropriate direction.
while using the camera function.
Inserting a microSD memory card forcefully into the slot
could result in failure to remove the microSD memory card ■ Charging with the Desktop Holder
or damage. Charging with the supplied Desktop Holder (SOL22PUA) and
Common AC adapter 04 (sold separately) is explained.
■ Removing microSD memory card
1
Insert the microUSB plug of Common AC adapter 04 (sold
1
While pressing the microSD memory card with tip of
separately), with the printed side (▲) facing up, straight into
your finger, slide it out
the microUSB connection terminal of the Desktop Holder
2
Attach the battery pack and the battery cover, and
2
Insert the power plug of Common AC adapter 04 (sold
press each tab to close firmly
separately) into an outlet
n
■ For Those Requiring an English Instruction Manual
You can download the English version of the Basic Manual
TM UL" (simply called the
from the au website (available from approximately one month
after the product is released).
Download URL: http://www.au.kddi.com/support/mobile/
guide/manual/
Safety Precautions
Before you start using the product, make sure to read the
TM
"Cautions on using Xperia UL" to ensure correct use.
Before you assume that the product is malfunctioning, check
for possible remedies in the following au Customer Support
site of au homepage:
http://www.au.kddi.com/support/mobile/trouble/repair
When using the product
･ Communication is not possible even inside the service area in
places where the signal does not reach (e.g. tunnels and
basements). Also, communication is sometimes not possible in
poor reception areas. Communication is sometimes interrupted
if you move into a poor reception areas during communications.
･ Since this product uses radio waves, the possibility of
communication intercepts by third parties cannot be
eliminated. (Though LTE/CDMA/GSM/UMTS system has
highly secure confidential communication features.)
･ This product is compatible with the international roaming
service. Each network service described in this manual varies
] [Instruction Manual]
depending on the area and service content. For details, refer
to the "Instruction Manual" (Japanese) application installed on
the product or "取扱説明書詳細版 (Full Instruction Manual)"
(Japanese) available on the au homepage.
a
® ®
o Bluetooth /Wi-Fi /
m n o
*1
Built-in antenna
p Flash/Photo light
q
mark
p
r au Micro IC Card (LTE) slot
q
s Battery cover
a b t Battery pack
u Speaker
r
v Second microphone:
c d e fg
Reduces noise to
s
make easy to listen.
w NFC (FeliCa TM t
*1
compatible) antenna
h x microSD memory card slot
u
y Built-in antenna *1
j
z microUSB connection terminal
A Desktop Holder
B C
k
contact terminal
B Strap hole *2
C Microphone
*1 The antenna is built in. Covering around the antenna by the
l
hand may affect the quality of call/communication.
i
*2 When attaching the strap, remove the battery cover, put the
strap through the strap hole and hook it on the inner side of the
hook, then press each tab firmly to close.
Attaching/Removing the battery pack
Before attaching/removing the battery pack and battery cover,
turn off the product. Do not attach the AC adapter.
Use a dedicated battery pack and attach it properly.
h
3
Place the product onto the Desktop Holder
Notification LED lights on the product.
4
When charging is complete, lift the product to remove
while pressing the Desktop Holder
5
Remove the Common AC adapter 04 (sold separately)
from the outlet
Common AC adapter 04
(sold separately)
] [Settings] [About
AC 100V
Notification outlet
LED
microUSB
connection terminal
Desktop Holder
microUSB plug
❖Information
･ You cannot charge the battery by connecting the Desktop
Holder to a PC.
■ Charging with the AC adapter
Charging with Common AC adapter 04 (sold separately) is
explained.
1
Open the microUSB connection terminal cover of the
product and insert the microUSB plug of Common AC
o
･ Since this product is a radio station under the Radio Law, ･ Screen illustrations shown in this manual may look different
you may be asked to temporarily submit the product for from the actual screens. In some cases, minor details or a
inspection in accordance with the Radio Law. part of a screen may be omitted.
･ The IMEI information of the cell phone is automatically sent ･ In this manual, "microSD
to KDDI CORPORATION for maintenance and monitoring memory card" and "microSDXC
operational status of your cell phone. abbreviated as "microSD memory card" or "microSD".
･ Take care not to inconvenience people around you when ･ "The Company" as appears on the product refers to the
you use the product in a public place. following companies:
･ When the product is used by a child, parents or guardians Sold by: KDDI CORPORATION, OKINAWA CELLULAR
should thoroughly read the "Basic Manual" "Cautions on TELEPHONE COMPANY
TM
using Xperia UL" and "Specific Absorption Rate (SAR) of Manufactured by: Sony Mobile Communications Inc.
cell phones" and teach the child how to use it.
Using au 災害対策 (au Disaster Countermeasure)
･ Before you start using the product overseas, check the
relevant laws and regulations of the country/region you visit.
You can use 災害用伝言板 (Disaster Message Board) service, 緊
■ Use of the product is not allowed in the
急速報メール (Emergency Rapid Mail) service that distributes 緊
following places!
急地震速報 (Earthquake Early Warning), 災害・避難情報 (Disaster
･ Do not use a cell phone while driving a car or riding a
and Evacuation Information) and 津波警報 (Tsunami Warning), and
motorbike or bicycle. Failure to do so might cause a traffic
災害用音声お届けサービス (Disaster Voice Messaging Service).
accident. Use of a cell phone while driving a car or
1
From the Home screen, [
motorbike is prohibited by law. Use of a cell phone while
Countermeasure)]
riding a bicycle may be punishable by some regulations.
au 災害対策 (au Disaster Countermeasure) menu appears.
･ Do not use this product while you are aboard an airplane.
Use of electric devices transmitting radio waves in airplane
■ Using 災害用伝言板 (Disaster Message Board)
is prohibited by law. Some airline companies, however,
Disaster Message Board service enables you to register information of
allow their passengers to use cell phones. For details,
well-being from an area of distress via LTE NET in case of large-scale
contact the airline company you use.
disaster such as earthquake with a seismic intensity of over 6 lower.
1
au 災害対策 (au Disaster Countermeasure) menu [災害
Regarding notations used in this document
用伝言板 (Disaster Message Board)]
･ In this manual, keys are represented by simplified
❖Information
illustrations such as x, y, r.
･ To register information of well-being, E-mail address
･ Operations of tapping menu items/icons/buttons on the
(∼ezweb.ne.jp) is required. Set up E-mail address beforehand.
screen etc. are indicated as [(name of the item etc.)].
b c
■ Attaching the battery pack
･ Be sure to check the au Micro IC Card (LTE) is certainly
attached and then attach the battery pack.
z
1
v Insert a fingertip into the gap on the side of the battery
cover and lift it up in the direction shown with the arrow ( )
w
A
x
■ Removing the battery pack
1
Remove the battery cover and put your fingertip in the
y
concave on the product, then lift the battery pack in the
Gap
direction of the arrow (
2
Align the terminals of the product with those of the
battery pack and insert the battery pack in the direction
of the arrow ( )
Battery Pack Terminals
2
Check the orientation of the battery cover and attach it
to fit the product. Press each tab to close firmly
au Micro IC Card (LTE)
3
Check the orientation of the battery cover and attach it
to fit the product ( ). Press each tab to close firmly ( )
Your phone number etc. is recorded in the au Micro IC Card (LTE).
i j
■ Charging with a PC
adapter 04 (sold separately), with the printed side (▲)
facing up, straight into the microUSB connection The followings describe charging procedure by connecting
terminal of the product
the product to chargeable USB port on a PC using the
2 microUSB cable of Sony Mobile AC adapter 05 (sold
Insert the power plug of Common AC adapter 04 (sold
separately) into an outlet separately).
Notification LED lights on the product. 1
Open the microUSB connection terminal cover and
3 insert the microUSB plug of the microUSB cable, with
When charging is complete, remove the microUSB plug of
the printed side (
Common AC adapter 04 (sold separately) from the product
microUSB connection terminal of the product
and close the microUSB connection terminal cover firmly
2
4 Insert the USB plug of the microUSB cable into the USB
Remove Common AC adapter 04 (sold separately) from
port of a PC
the outlet
Notification LED lights on the product.
Notification LED
When a confirmation screen for installation of PC
Companion software appears on the product, tap "Skip".
When a screen for new hardware detection etc. appears on
the PC, select "Cancel".
3
When charging is complete, remove the microUSB plug
of the microUSB cable from the product and close the
microUSB connection terminal cover firmly
4
Remove the USB plug of the microUSB cable from the
USB port of the PC
❖Information
･ Installation of MTP driver to a PC is required to charge the
product with a Microsoft Windows XP PC, since "USB
connection mode" is set to "Media transfer mode (MTP)" by
microUSB plug
AC 100V
default. Install Windows Media Player 10 or later to install
outlet
MTP driver.
Common AC adapter 04
(sold separately)
p q
■ Using 緊急速報メール (Emergency Rapid Mail)
Emergency Rapid Mail is a service that distributes Earthquake
Early Warning or Tsunami Warning delivered from the
TM memory card", "microSDHC TM
meteorological bureau or Disaster and Evacuation Information
TM
memory card" are
delivered from the government or local public organization to all
au cell phones in specified areas simultaneously.
When you receive Earthquake Early Warning, ensure your
safety and take proper action according to the situation
around you. When you receive a Tsunami Warning, draw away
from sea coast immediately and evacuate to safe place such
as upland or well-built high building.
1
au 災害対策 (au Disaster Countermeasure) menu [緊急
速報メール (Emergency Rapid Mail)]
❖Information
･ Reception of Emergency Rapid Mail is notified by a special
warning tone. It is not possible to change the warning tone.
･ Earthquake Early Warning may not arrive before strong
tremors in areas near the epicenter.
] [au 災害対策 (au Disaster
･ Tsunami Warning is a major tidal wave/seismic sea wave
notification delivered from the meteorological bureau to the
area including target coast.
･ Disaster and Evacuation Information is a service that
distributes bulletins concerning residents' safety including
evacuation advisories, evacuation orders and other
warnings issued by the national and local governments.
･ The service is available only in Japan (it cannot be used overseas).
･ No information fee or communication charge is required for
receiving Emergency Rapid Mail.
･ KDDI is not liable for damages suffered by customers
resulting from the service's information, lack or delay in the
information caused by transmission or system breakdowns,
or other events that are outside the responsibility of KDDI.
d
The product is compatible only
with au Micro IC Card (LTE). You
cannot use the product with an au
IC-card or micro au IC card
switched from an au cell phone or
au smartphone.
Do not insert an au Nano IC Card
(LTE) with a conversion adapter.
Doing so may cause a fault.
Attaching/removing the au Micro IC Card (LTE)
Before attaching/removing the au Micro IC Card (LTE), make
sure to turn off the product and remove the battery cover and
battery pack. Do not attach the AC adapter.
)
❖Information
･ Note the following points, otherwise handling the au Micro
IC Card (LTE) may cause malfunction or damage.
･ Do not touch the IC (metal) part of the au Micro IC Card
(LTE) or the IC card terminal inside the product.
･ Insert in the correct direction.
･ Do not use force to attach or remove.
･ Do not lose the au Micro IC Card (LTE) after it has been
removed.
Concave
■ Attaching the au Micro IC Card (LTE)
1
Hook the projection ( ) of the tray with your fingernail
and slide the tray straight out, then insert the au Micro
IC Card (LTE) with IC (metal) side facing down into the
tray and press the tray with the card all the way
Insert au Micro IC Card (LTE) with the notch facing out.
k
Turning on (Initial settings)
Turning the power on
1 P (over 1 sec)
The product vibrates and after a while the unlock screen
) facing up, straight into the
appears.
2
Swipe the screen up or down
■ Turning the power off
1 P (over 1 sec)
2
[Power off] [OK]
❖Information
･ Press P for over 1 second and long-touch "Power Off" →
[OK] to restart product.
Initial settings
When you turn on the product for the first time, swipe (flick)
the screen up or down to unlock screen lock and follow the
onscreen instructions to set language, functions, service, etc.
For details, refer to "Setting Guide".
❖Information
･ Setup items can be set or changed later as required. To
change the language later, from the Home screen, [
[Settings] [言語と入力 (Language & input)] [地域／言
語 (Language)]. To make settings, from the Home screen,
[ ] [Settings] [Setup guide]. To make settings for au
r
･ Refer to the Japan Meteorological Agency web page for details
about distribution of Earthquake Early Warning.
http://www.jma.go.jp/
･ You cannot receive Emergency Rapid Mail when your cell
phone is turned off or during a call.
･ Emergency Rapid Mail may not be received when your cell
phone is communicating such as while sending/receiving
SMS/e-mail or using the browser, or if you are in a place where
signal does not reach even in the service area (e.g. in a
tunnel, basement) or in a place with a poor reception.
･ You cannot receive the Emergency Rapid Mail that the
reception is failed.
･ This delivery system is different from Earthquake Early
Warning provided through TV, radio, or other communication
procedures, which means that the time the Earthquake Early
Warning arrives may vary.
･ Information from someplace other than your current location
may be received.
■ Using 災害用音声お届けサービス (Disaster Voice
Messaging Service)
Disaster Voice Messaging Service is a service which allows
you to record your voice and send someone you want to
inform your well-being in case of a large-scale disaster.
1
au 災害対策 (au Disaster Countermeasure) menu [災害用
音声お届けサービス (Disaster Voice Messaging Service)]
❖Information
･ Sending/Receiving voice messages is available only via LTE/
®
3G network. Turn off wireless LAN (Wi-Fi ) and then use it.
･ Voice message can be recorded for up to 30 seconds.
･ Voice messages cannot be saved or played if the product
does not have available memory.
e f
au Micro IC Card (LTE)
IC (metal) part
Tray
Front Back
au Micro IC Card (LTE)
Notch
2
Attach the battery pack and the battery cover, and
press each tab to close firmly
■ Removing au Micro IC Card (LTE)
1
Hook the projection of the tray with your fingernail and
slide the tray straight out, then while pressing the au
Micro IC Card (LTE) with tip of your finger, slide it out
2 Press the tray all the way into the end, and attach the
battery pack and the battery cover, and press each tab
to close firmly
Attaching/Removing microSD memory card
Before attaching/removing the microSD memory card, make
sure to turn off the product and remove the battery cover and
the battery pack. Do not attach the AC adapter.
l m
service etc., from the Home screen, [ ] [au Easy
Setting].
Screen Lock
When the screen lock is set, the backlight turns off to avoid
the keys and touch panel from false operations.
･ When the specified time elapses, the product's screen
backlight turns off automatically and screen lock is
activated.
1 While the screen is displayed, P
■ Unlocking screen
The unlock screen appears when turning the power on or the
backlight on by pressing P.
1 Swipe (flick) the screen up or down on the unlock
screen
❖Information
･ By default, drag "
" left to activate the camera, and drag
" " right to activate WALKMAN.
]
s t