Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for gbo TESI Relax
- Page 1 Massage Table ® TESI Relax User Manual gbo Medizintechnik AG Version 2.1...
- Page 2 TESI Relax The company gbo Medizintechnik AG has taken care in the preparation of this manual, but makes no expressed or implied warranty of any kind and does not assume any responsibility for errors or omissions. All rights reserved. No part of this manual may be reproduced, in any form or by any means (electronic, mechanical, or otherwise) without the prior written permission of gbo Medizintechnik AG.
- Page 3 TESI Relax Notations Times New Roman in type size 11 - Descriptions and explanations; Arial in type size 10 - Keys and buttons of the TESI tables; Lucida in type size 10/11 - Text appears on the display of the TESI tables.
-
Page 4: Table Of Contents
TESI Relax Contents INTRODUCTION Intended use Note concerning the operating personnel Description of the unit Device view of TESI table Short instructions START OF OPERATION Transport and assembly Connection and switch-on 2.2.1 Fuses Placing out of operation Waste removal of the device and accessories Settings 2.5.1... - Page 5 TESI Relax Course of treatment BEHAVIOR IN CASE OF FAILURES Notes Warnings Errors Other notes MAINTENANCE Legal provisions and requirements Safety controls Cleaning, disinfection and care WARNINGS AND SAFETY PRECAUTIONS EXPLANATION OF THE SIGNS USED TECHNICAL DATA ACCESSORIES INDEX gbo Medizintechnik AG...
-
Page 6: Introduction
1.2 Note concerning the operating personnel The device is to be operated by healthcare professionals only. 1.3 Description of the unit The TESI Relax tables are medical devices for combined physical therapy. The following options for treatment are offered: thermotherapy, paravertebral massage, vibration. -
Page 7: Device View Of Tesi Table
TESI Relax 1.4 Device view of TESI table Touch Screen (5) Slot for Compact Flash Card (1) Slot for Chip Card (2) Stepped bed (3) Support arm (6) Handle (4) Infrared remote control(7) Head phones for audio playback (8) Middle section =... -
Page 8: Short Instructions
TESI Relax 1.5 Short instructions 1. Switch on the table through the main switch at the front of the head piece (13). The device carries out an automatic check of all functions. The faultless automatic check ends with an acoustic sign (triad-gong). - Page 9 TESI Relax Note! You can handle the table at any time with the Touch Screen as well as with the remote control. The activated function will appear in green colour on the display. gbo Medizintechnik AG Version 2.1...
-
Page 10: Start Of Operation
Medizintechnik AG immediately . 2.2 Connection and switch-on The TESI Relax has been set to be connected to supply voltages of 100 - 240 V. Irrespective of the adjusted mains voltage, the device is appropriate for power frequencies of 50 to 60 Hz. -
Page 11: Fuses
TESI Relax Warning! To avoid the risk of electric shock, this equipment must only be connected to a supply mains with protective earth. It is only allowed to connect CompactFlash-cards or chip-cards provided by the manufacturer into the card-slots of the device. -
Page 12: Settings
TESI Relax 2.5 Settings 2.5.1 The menu You can open the menu by using the adjustment card or a service card. The adjustment card is included in the delivery of the table. When inserting the respective card the menu will be opened. It provides the following submenus: Basic settings (see Chapter 2.5.3);... -
Page 13: Basic Settings
TESI Relax 1. Insert the service card or adjustment card in the intended slot at the Touch Screen. 2. You are in the menu. Act according to the instructions on the Touch Screen. 3. Touch the for settings. Button 4. You are in the submenu settings. The submenu provides the above-mentioned options. -
Page 14: Creating Chip Cards
TESI Relax 2.5.4 Creating chip cards For the creation of chip cards please act according to the instructions on the Touch Screen! 1. Insert the service card or adjustment card (see Chapter 3.5) in the intended slot at the Touch Screen. -
Page 15: Description Of Function
TESI Relax Description of function 3.1 Standby-push-button standby-push-button is placed on the right side below the Touch Screen. If the device is in standby- mode, is shining. the standby-push-button You can put the table in standby-mode by pressing . The stepped bed will lower the standby-push-button down and all functions of the table are switched off. -
Page 16: Touch Screen
6. Lock the housing of the remote-control on the bakcside with the cross-head screw. 3.4 Touch Screen TESI Relax has a high-resolution colour graphic display (640 x 480 pixels). In front of this display there is a touch panel. This whole unit is therefore called Touch Screen. -
Page 17: Chip Cards
Changing basic settings, see Chapter 2.5.3. 3. Personal card With this chip card the patient can use the TESI Relax for pre-paid time of treatment. The treatment settings used last are stored on the card and will be applicable for the next treatment. -
Page 18: Therapy
TESI Relax Therapy 4.1 Thermotherapy For thermotherapy the cover of the middle section of the TESI Relax table can be heated. If required the thermotherapy can be combined with all other therapies. By touching the on the Touch Screen the temperature of the cover of the middle... -
Page 19: Course Of Treatment
TESI Relax 4.3 Course of treatment In general, the course of treatment is as follows: User guidance and hints for remote control. Patient has to follow the instructions. Figure 3: Basic display of Touch Screens 1. Follow the instructions on the Touch Screen. - Page 20 . Continue with point 9. Button (OK) 9. You will find the instruction to remove the chip card. After removing the chip card TESI Relax will be deactivated. 10. After the treatment the patient should remain in an upright position with his legs dangling over the side of the table for about 3 to 5 minutes and remain quiet and relaxed.
-
Page 21: Behavior In Case Of Failures
TESI Relax Behavior in case of failures The following failures will be indicated by the TESI table both optically and acoustically. Most of them can be remedied by following the instructions on the display. As a rule, the following applies: 1. -
Page 22: Errors
TESI Relax Warning – The spindle motor is blocked and was stopped. Possible reason: The contact pressure adjuster for the carriage cannot be moved and has therefore been stopped for safety reasons. Suggestion: 1. Remove all unnecessary loads from the cover. -
Page 23: Maintenance
TESI Relax Maintenance Functionality, reliability and safety characteristics of the TESI Relax table are only guaranteed in case of proper use in accordance with the operating instructions. Safety control, maintenance work, repair work and modifications shall only be carried out by the manufacturer or the service agents authorized by him. In case of a failure, parts which influence the safety of the device shall only be replaced by original spare parts of the manufacturer. -
Page 24: Cleaning, Disinfection And Care
Warnings and safety precautions Warning! Do not pierce the heating cover accidentally. In case of any visible operational disturbances, please contact immediately gbo Medizintechnik AG or one of the service agencies authorized by gbo Medizintechnik AG. gbo Medizintechnik AG... -
Page 25: Explanation Of The Signs Used
TESI Relax Explanation of the signs used 0123 CE Conformity sign Observe the instructions for use! Application section with protection class B This product complies with WEEE Directive 2002/96/EG (waste electrical and electronic equipment). Separate collection for electrical and electronic equipment. -
Page 26: Technical Data
Relative air humidity < 90 %, non condensing By request of technical personnel gbo Medizintechnik AG can offer spare part lists check lists and circuit diagrams. The mains connector is used for all pin disconnection from the mains power supply. -
Page 27: Accessories
Headphones (for hardware revision F and higher) 017-4-0005 Head phones (wireless, for hardware revision E and lower) 018-4-0012 Cervical bolster small 016-0-0058 Note! Use gbo original accessories only to guarantee the safe function of the unit. gbo Medizintechnik AG Version 2.1... -
Page 28: Index
TESI Relax 11 Index assembly 10 Note 8, 9, 12, 14, 18, 20 Basic settings 13 Remote control 15 Chip cards 17 settings 12 Chipkarte 17 Short instructions 8 Compact Flash Card 17 Standby-switch 15 Connection and switch-on 10 supply voltage 10... - Page 29 TESI Relax Notes in accordance with the EC Directive and Medical Device Directive ® The TESI Relax is a mains operated system for combined physical therapy of protection class I. The device is in accordance with the EC Medical Device Directive (93/42/EEC) and therefore carries the CE sign with the registration number of the notified body for medical devices.
- Page 30 TESI Relax In accordance with the EMC-regulations for medical products we are obliged by law to provide the following information. Guidance and manufacturer’s declaration — electromagnetic emissions The equipment is intended for use in the electromagnetic environment specified below. The customer or the user of the equipment should assure that it is used in said environment.
- Page 31 TESI Relax Guidance and manufacturer’s declaration — electromagnetic immunity The equipment is intended for use in the electromagnetic environment specified below. The customer or the user of the equipment should assure that it is used in said environment. Electromagnetic environment –...
- Page 32 TESI Relax gbo Medizintechnik AG Version 2.1...
Need help?
Do you have a question about the TESI Relax and is the answer not in the manual?
Questions and answers