Advertisement
by eduGear
®
Charging Cabinet Owner's Manual
Before using, please read these operating instructions carefully.
They contain important advice concerning the use and safety of your Charging Cabinet. The
Charging Cabinet must only be used for its intended purpose in accordance with these
operating instructions.
Any misuse of the product will void the warranty.
Advertisement
Table of Contents
Summary of Contents for EDUGEAR mobiLAB
- Page 1 ® Charging Cabinet Owner’s Manual Before using, please read these operating instructions carefully. They contain important advice concerning the use and safety of your Charging Cabinet. The Charging Cabinet must only be used for its intended purpose in accordance with these operating instructions.
-
Page 2: Table Of Contents
Contents Product Specifications Before You Start Introduction • Package Contents • Cabinet Diagrams • Door Lock • LED Status • Interior View Setup Optional Features... -
Page 3: Product Specifications
Product Specifications Model Name Charging Type 14-Unit Charging Cabinet AC Charge Capacity 14 devices LED indicator Green / LED Power On Support Device Devider Type Chromebook / Laptop / Plastic Dividers Tablet up to 14” Slot D380.5 x W34.6 x H264.3mm N.W. -
Page 4: Before You Start
Do not place TV or monitor on top of the product. Do not use the product to store liquids or cleaning supplies. Keep the door closed and locked when in use. Disconnect the power cable from the wall before relocate the main unit. Call: 888.505.8878 Online: edugear.com Email: support@edugear.com... -
Page 5: Introduction
Introduction Package Contents Power Cord x1 Cable Clips x 14 Cabinet x 1 User Manual x 1 Cabinet Diagrams Front View Side View Rear View... -
Page 6: Door Lock
Door Lock LED Status: Off‒Power off ON‒Green Light on→ Devices are charging Interior View Top View with Top Cover Off Call: 888.505.8878 Online: edugear.com Email: support@edugear.com... -
Page 7: Setup
Setup Step 1 Remove the 3 screws. Step 2 Slide the top cover of cabinet then open the front doors. Step 3 Insert the power plug of your device into the power strips located in the top compartment of the cabinet. - Page 8 Step 6 Once all of your devices and cables are properly in place, connect all of your devices and power on the cabinet to make sure all devices are receiving a charge. Call: 888.505.8878 Online: edugear.com Email: support@edugear.com...
-
Page 9: Optional Features
Optional Features Install Casters View Screw the wheels 2”Wheel Set(2 with brake, 2 w/o brake) 16pcs Wheel Screw (M5 x 10mm) 16pcs Washer... - Page 10 Place the holding plate on the wall, and then tighten with M5 stainless screws. Position product over the wall bracket and then slide it downward to set it in place. One wallmount kit can only support one cabinet. Call: 888.505.8878 Online: edugear.com Email: support@edugear.com...
- Page 11 Need Support? Contact Us: Call: 888.505.8878 Email: support@edugear.com Online: edugear.com...
Need help?
Do you have a question about the mobiLAB and is the answer not in the manual?
Questions and answers