Related Manuals for Meaco MeacoHeat Motion Eye
Summary of Contents for Meaco MeacoHeat Motion Eye
- Page 1 MeacoHeat PTC Ceramic Heaters MeacoHeat Motion Eye 1.8kW MeacoHeat MotionMove Eye 2.0kW PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING. INSTRUCTION MANUAL [EN] MeacoHeat...
- Page 2 Do not store or operate outdoors. If electrical wiring or components become wet, thoroughly dry them before using the unit. If in doubt do not use the heater and consult a qualified electrician or a Meaco approved engineer.
- Page 3 If in doubt do not use the heater and consult a qualified electrician or a Meaco approved engineer. The operator must make the operating instruction available for the user and make sure that the user does understand the manual.
- Page 4 For transportation the heater should be secured on a level base and must be prevented from rolling around. This heater must be used exclusively for heating the air. 3. PRODUCT INDENTIFICATION MeacoHeat Motion Eye 1.8kW Motion Sensor Handle Air inlet with filter behind.
-
Page 5: Control Panel
OFF Timer - on the MeacoHeat Motion Eye 1.8kW this allows you to have the heater automatically turn off after a maximum of 7 hours of operation. This is not a daily run timer and the unit will not turn back on until you next press the ON/OFF button. - Page 6 4. OUTPUT Model High 900 watts 1800 watts MeacoHeat Motion Eye 1.8kW 1000 watts 2000 watts MeacoHeat MotionMove Eye 2.0kW 5. SAFETY This unit has a safety system, which automatically switches the appliance off, when it is overheating. If this happens unplug the heater and allow cooling down for 20 minutes.
- Page 7 …………………………………………………….. Meaco are specialists in heaters and would welcome your comments and questions on this heater. If you do develop a fault within the first year then please do call us and if we cannot fix the problem over the phone we will be happy to collect the heater from you at our expense and repair or replace as appropriate.
Need help?
Do you have a question about the MeacoHeat Motion Eye and is the answer not in the manual?
Questions and answers