Summary of Contents for Aurora Design FMR-2.5
-
Page 1: Operation Manual
Notes: Aurora Design FMR-2.5 Dealer Name: Date: User Installation and Job #: Operation Manual *Subject to change without notice **Characterized by component manufacturer Aurora Design LLC. ©2013-18 Rev 2.9 2/18 www.tech-retro.com... - Page 2 Specifications*: Your radio Configuration: FM Receiver: ☐ Tone Control - Original Frequency Range: 87.5-108MHz (Worldwide except Japan) ☐ Tone Control - External control 76.0-90.0MHz (Japan) ☐ Tone Control - Using tone switch and volume control Channel Spacing: 200kHz (America’s) 100kHz (all other regions) ☐ Balance Control - Original Sensitivity:** 5.0dBµV @ 26dB SNR...
-
Page 3: Troubleshooting
Congratulations on your new FMR-2 converted radio. With the FMR-2 Line Out: Optional Line Out jacks may have been added to your radio if installed in your radio you will experience unrivaled performance, features and requested. The five outputs (front/rear pair and subwoofer) can be attached to reliability all while retaining the radios original appearance. - Page 4 Virtual Fader: Quickly twist the tone control back and forth twice to the 3) If one speaker is attached to the left or right front output and the other right. The tone control temporarily becomes the fader control. A tone will speaker is attached to the opposite channel (right or left) rear output, the alternate between the front and rear channels to verify you have entered the FMR-2 will enable stereo mode and the fader control.
Need help?
Do you have a question about the FMR-2.5 and is the answer not in the manual?
Questions and answers